Type in the full discussion title or a part of it.
Discussion Title Created date
Single Shot ADC conversion from multiple channels.
Hi,   I am created atmel start  project using SAME51J19A  MCU and configured the ADC module with resolution of 16 -bit.   in the module configuration ,i found...
Thursday, 28 March 2019 - 07:42
ADC conversion time
Hi,   I created atmel  start project using SAME51J19A controller and added ADC sync module and configured as below:           For this 16bit...
Sunday, 24 March 2019 - 08:59
ADC in SAME51J19A MCU
Hi, i created atmel start project using SAME51J19A controller and added ADC module to the module.   I used basic configuration while creating module as follows:  ...
Monday, 18 March 2019 - 10:25
Atmel tool project configuration
Hi,   I am using the atmel start project's for my application. i created atmel start project long back.   For reconfigure the project modules i am using the tab as below...
Saturday, 23 February 2019 - 10:06
System frequency of SAME51J19A
Hi,   I  created atmel start project by using SAME51J19A controller. i am loading and running the code , here i want to find out at what frequency is it running.  ...
Tuesday, 18 December 2018 - 11:37
PWM configuration in SAMV71Q21 controller
Hi,   I am creating atmel start project using samv71q21 controller, and configuring PWM but it is not working.   i am not getting where i am going wrong. code as follows...
Tuesday, 4 December 2018 - 12:06
Issues in setting baudrate of uart in SAMV71Q21 controller
Hii,   I am working on SAMv71Q21 controller and created atmel start project , added UART synchronous module. here while adding the module i set the baud rate as 9600. during...
Monday, 26 November 2018 - 09:58
Handling of Interrupt debounce
Hello,   I have a ATSAMV71Q21 controller .I have a problem with the Interrupt de-bouncing. I am trying to write a program to count a pulses , I configured a one GPIO as a...
Wednesday, 31 October 2018 - 09:42
Reading 10 bytes data from URAT rx_cb using Timer day
Hi,   I created atmel start project using samv71q21 controller and  added asynchronous USART driver for receiving data, here i used timer interrupt to maintain the delay...
Thursday, 25 October 2018 - 08:12
Error while debugging ATMEL ICE BASIC debugger with SAMV71Q21 controller
Hi,   I created atmel start project for blinking of led , it is working fine with EDBG debugger and giving proper result. recently i changed my debugger to Atmel ICE basic ,...
Monday, 22 October 2018 - 12:54
Reading the Data using Asynchronous USART call back fuction
Hi,   I am created atmel start project using SAMV71Q21 controller, and using USART Asynchronous module to read the data and here i am using RX_CB(callback function). code as...
Saturday, 13 October 2018 - 12:10
Read data from flash memory in SAMV71Q21 controller
hi,   i am creating atmel start project using SAMV71Q21 controller, and reading the data from flash and writing in to uart to check data is reading from flash or not , code...
Friday, 5 October 2018 - 06:41

Pages