Post Created date
SAML21 Freezes in system_gclk_chan_enable() Function.
Hi  Lajon ,          Thank you for your support. If i run in  SYSTEM_CLOCK_DFLL_LOOP_MODE_USB_RECOVERY  mode by disabling ...
Friday, 1 March 2019 - 07:43
SAML21 Freezes in system_gclk_chan_enable() Function.
Hi Lajon,     I made the changes you suggested. I'm working on customised board. If i run the code for USB CDC on my board with the changes in clock.c & ...
Monday, 25 February 2019 - 09:05
Allocating a receiver buffer for variable length of data from host in USB communication.
Hi  Lajon ,     The issue i'm facing is happening may be because of if host send a data device is sending the data in the response buffer.    In my...
Tuesday, 5 February 2019 - 09:10
Allocating a receiver buffer for variable length of data from host in USB communication.
Hi  Lajon , I added the delay as you suggested and checked it with delay of 100 and 1000.     for(int i=1;i<=1;i++) { System.out.println(); System....
Tuesday, 29 January 2019 - 11:28
Allocating a receiver buffer for variable length of data from host in USB communication.
hi  Lajon , I checked  the code you send with mu GUI it is giving the same error. I'M  unable to check with the python code. I'm attaching the host code below...
Tuesday, 29 January 2019 - 06:30
Allocating a receiver buffer for variable length of data from host in USB communication.
Hi  Lajon ,   I tried with sending data one time to host without the loop. When i click send then only host transfer the data. First time the device will send back...
Friday, 25 January 2019 - 06:38
Allocating a receiver buffer for variable length of data from host in USB communication.
hi  Lajon ,  I faced this issue on my application now i'm checking this on the code i mentioned above there also i got the same error.(Recv and  Snd back the same...
Thursday, 24 January 2019 - 13:56
Allocating a receiver buffer for variable length of data from host in USB communication.
Hi  Lajon ,   " I think you need to find out if the first ack is received eventually or if it in fact is not received "--->I checked the traffic using wire shark the...
Thursday, 24 January 2019 - 12:02
Allocating a receiver buffer for variable length of data from host in USB communication.
Hi  Lajon,    My application is to read the command  from the host to the device and perform the operation suggested by the host and send  ...
Wednesday, 23 January 2019 - 05:42
Allocating a receiver buffer for variable length of data from host in USB communication.
Hi  Lajon,     Actually why its causing this problems, because i'm receiving all the data in a single buffer?
Wednesday, 16 January 2019 - 05:04
Allocating a receiver buffer for variable length of data from host in USB communication.
Hi Lajon ,       The normal messages i'm sending is all in  numbers ( string ) like numbers from  2000 to 3000 (i'm doing such a way that if i...
Monday, 14 January 2019 - 10:18
Allocating a receiver buffer for variable length of data from host in USB communication.
hi  Lajon ,       I used to send string to check the connection status every instant i send "1234". The device is connected  i have to send back the same...
Monday, 14 January 2019 - 05:48

Pages