Post Created date
How Reliable Are MCU's?
Remember that billions of billions controllers around us work every day very reliable. They can do this because the underlying laws of nature are highly reliable. A residual risk...
Saturday, 30 March 2019 - 05:59
How Reliable Are MCU's?
Kartman wrote: Microcontrollers are basically unreliable! No! My Home-Control ATMEGA128 including some other electronic has been working reliably for more than 10 years now.
Friday, 29 March 2019 - 22:10
Playing with the new tinyAVR 1-series
It's not worth it. Too many can do that 😀 The hardware is simple. Programming is the bigger challenge.
Wednesday, 27 March 2019 - 16:34
Playing with the new tinyAVR 1-series
Moe123 wrote: If you did that I bet if the chip going to work, decoupling capacitor Don't worry Moe123. There is no need to bet because it works. Ok, a capacitor does not hurt....
Wednesday, 27 March 2019 - 16:19
Playing with the new tinyAVR 1-series
Well, related to modern AVR controllers there is no big difference between devkit and single chip. A Tiny1614 normally only need power and a 3 Pin UPDI Connector... Any hobbyist...
Wednesday, 27 March 2019 - 15:49
Playing with the new tinyAVR 1-series
Hi Moe123, have look first the GreenPak features. Then you can answer question why AVR hobbyist should invest time and money in this other technology if you can use a modern...
Monday, 25 March 2019 - 17:43
Playing with the new tinyAVR 1-series
gchapman wrote: GreenPAK | Dialog Semiconductor Interesting alternative. Realistically, a hobbyist will use a second and third AVR here rather. A controller that you can already...
Monday, 25 March 2019 - 17:01
Playing with the new tinyAVR 1-series
markxr wrote:It depends how fast your pulses are.   Sure. But it also applies: In a system which should provide reserves for further expansion maximum efficiency from the...
Sunday, 24 March 2019 - 20:19
Playing with the new tinyAVR 1-series
markxr wrote: Every input pin can generate an interrupt Yes and no. Every port can generate one interrupt only. Within this interrupt then the individual pins must be evaluated...
Sunday, 24 March 2019 - 17:54
Playing with the new tinyAVR 1-series
markxr wrote: it seems that the TCD peripheral can also count pulses / events.   I don't know how. Type D is used for waveform generation / available in series1 only....
Sunday, 24 March 2019 - 09:45
Playing with the new tinyAVR 1-series
A thing is a pity: There is only one Timer Type A that can count pin signal changes - > events very useful in hardware without the need for an interrupt / cpu involvement (equally...
Sunday, 24 March 2019 - 07:04
Playing with the new tinyAVR 1-series
El Tangas wrote:This way, you can have a blinky all in hardware, without spending a timer that may be used for other things. That is certainly the most elegant way using a LED...
Wednesday, 20 March 2019 - 21:21

Pages