Type in the full discussion title or a part of it.
Discussion Title Created date
Free PCB CAD package
Friday, 9 July 2010 - 23:34
metal backed PCB laminate
Ladies and Gentlemen, Some of You may have seen a few posts over the past month or so pertaining to a PCB prototyping service either originated by or contributed to by Yours...
Friday, 30 April 2010 - 23:30
Picotest M3500A multimeter
has anyone had any experience with the above multimeter or for that matter any other Picotest gear?
Monday, 12 April 2010 - 08:47
For Your refference
For those long winter nights when you wished Your powersupply designs were less efficient and Your code ran in ever increaing loops http://www.techonline.com/learni...
Thursday, 8 April 2010 - 06:37
Fluoro tubes
Has anyone dabbled in replacing fluoro tubes with solid state lighting? Experiences? Gotchas? Solutions?
Wednesday, 24 March 2010 - 08:05
Lost Topic
I was in the process of posting a response ( see below) to a question on a light curtain when the server suffered a glitch. I do not see the topic in the list any more. In any...
Wednesday, 10 March 2010 - 23:17
[DIS] Bootloader
Any kind well versed soul out there who might put forward an idiots guide to bootloader.... Please :?
Friday, 5 May 2006 - 06:05
[TUT] [SOFT] Guidelines for writing efficient C/C++ code
An interesting article. http://www.eet.com/news/latest/showArticle.jhtml?articleID=184428758
Thursday, 6 April 2006 - 00:35
WINAVR 20050214 definitions of ADC registers
In the previous release of WINAVR the ADC conversion result was to be found in ADCW register ( in case of mega16 and mega8). Current release lists ADC for mega16 and ADCW for...
Thursday, 24 February 2005 - 00:56
Low frequency spectrum analyser
Has anyone attempted todesign, or seen adesign of a low frequency ( audio) spectrum analyser? I have been looking for aproriate information on descrete fast fourier transforms...
Wednesday, 9 February 2005 - 03:17
SPI and 16 bit control word transmission
Linear technology have a beaut dual 10 bit DAC part no. LTC1661 which lives in an 8 pin packageon a 3 wire serial interface. http://www.linear.com/pc/productDetail.do?navId=H0,C1...
Monday, 24 January 2005 - 01:58
MEGA8, GCC and Timer2 output compare interrupt
Dont know wheter this is an AVR or GCC topic.. anyways here goes. I have configured counter two for phase correct PWM. Everything is fine I get the PWM output on PORTB pin3 ( OC2...
Wednesday, 5 January 2005 - 09:39