Post Created date
SAMR34 X PRO DEV KIT ADC & UART Example Code
I didn't see you were using ASF. You can generate examples for the R34. If you want a quick solution, generate example projects for the D(or L)21 using USART, and then another for...
Monday, 17 February 2020 - 06:33
SAMR34 X PRO DEV KIT ADC & UART Example Code
This does not have code for the SAMR34 unfortunately, but the SAMR34 is quite similar to the D21/L21 as far as adc reading I'm pretty sure. Couldn't find anything on R34 =/...
Monday, 17 February 2020 - 06:24
SAMR34 X PRO DEV KIT device is not detected in Atmel Studio 7
AlexNP wrote: Yes (photo attached) - the board is plugged in via the EDGB USB and I've opened the LED TOGGLE example code    If you go to View -> Available Tools, do...
Saturday, 15 February 2020 - 19:16
My Battle...
Fianawarrior wrote: Guys, I've freaked yous lately about my battle to port the SAM5DXX bare metal framework over to C++. Well...  Sad, but I'm nearly there...   The only...
Saturday, 15 February 2020 - 18:09
delay_ms timing is way off due to SysTick [SAME54_XPLAINED w/ASF4]
PenguinWasHere wrote: So I used an Atmel Start generated project, and I am using the following code to configure and enable systick:         // Configure...
Thursday, 13 February 2020 - 06:03
SAM4E C++ ASF Working Project
Thanks for this! I don't own a SAM4E, but I have always wanted to get ASF3 working with C++. Now I have a reference.
Thursday, 13 February 2020 - 02:06
SAML21 Hardware Reference Design?
Not sure if you already found this, but the SAML21 XPLAINED Design Docs helped me:    http://ww1.microchip.com/downloa...   That is a direct download, but here is...
Thursday, 13 February 2020 - 01:21
Support of ASF 3 by SAM E54 Xplained Pro
malaugh wrote: I am a new user of the SAM parts, normally use PIC parts.  We are a big customer of Microchip, so their reps come to visit every 2 weeks or so. ...
Thursday, 13 February 2020 - 00:02
Support of ASF 3 by SAM E54 Xplained Pro
I can't speak for Microchip, but ASF4 is being actively worked on so I doubt they would completely move to MPLAB. If they do, I know myself and a lot of others will simply drop...
Wednesday, 12 February 2020 - 22:14
Support of ASF 3 by SAM E54 Xplained Pro
I'm pretty sure there's no way to port ASF3 drivers to the SAME/D5x. The chip is relatively new, and the only similar chips I've seen are the D21 (but the new E/5x is on steroids...
Wednesday, 12 February 2020 - 04:35
Question About Running at 1.8v vs 3.3v [ATSAMD21J18A/ATSAME54P20A]
Thanks for the response. I saw this, but I didn't know if the mcu was particular about operating voltage vs operating frequency. Guess not. 
Wednesday, 12 February 2020 - 04:29
Atmel START not fit for purpose and no alternative provided
I realize I am late to the party, but I just wanted to say I feel the same way. ASF3 was really rough around the edges, but I like that they didn't use the HAL format for their...
Wednesday, 12 February 2020 - 00:49

Pages