Post Created date
MEGA-1284P Xplained Launched
Nice. Count me in too.
Friday, 13 May 2011 - 22:31
bumble-b documentation?
Hello pib. I have a copy for you. I hope it's the good version. Click(pdf). Or download it from the link below:
Monday, 28 February 2011 - 18:18
A few NGW100 questions
Ok, nice :D I found this( programmer, it look really nice and it able to act like a JTAGICE MK2. And it is MUCH cheaper....
Sunday, 28 September 2008 - 17:57
Crystal VS clock? Wrong fuse
> What frequency are you getting from the live AVR? Do not know... I do not have a frequency meter > The ISP frequency must be less than 1/4 of the frequency you put into the dead...
Tuesday, 10 July 2007 - 20:41
Crystal VS clock? Wrong fuse
I'm using a simple parallel-programmer. With this simple C code: #include int main() { DDRD |= (1 << PD1); while(1){ PORTD ^= (1 << PD1); //toggle the PD1 pin...
Tuesday, 10 July 2007 - 20:21
Crystal VS clock? Wrong fuse
So I only have to send "1's" and "0's" to the Xtal 1 pin with another AVR. Thanks.
Tuesday, 10 July 2007 - 19:01
[TUT] [C] Newbie's Guide to AVR Timers
Nice tutorial! I'm waiting for the next chapters.
Friday, 6 July 2007 - 15:15
lcd wrong characters
Thanks for the tip.... will try it! @Bobgardner You are the funniest at home? :mrgreen:
Monday, 5 March 2007 - 16:18
lcd wrong characters
Thanks, but what is a BFC? Or are you joking?
Monday, 5 March 2007 - 16:04
lcd wrong characters
And what I do about it? I've some 4007 diodes between the to motors. Sorry, I cannot find the schematic :S
Monday, 5 March 2007 - 15:41
lcd wrong characters
Yes, I'm able to send and show the right characters on the lcd. When I turn on the motors, I get the wrong characters. The motors have an external power supply. The ground is only...
Monday, 5 March 2007 - 15:26
Using shift register
Thanks all! I will make my own code, with your examples
Friday, 23 February 2007 - 16:02