Type in the full discussion title or a part of it.
Discussion Title Created date
A few NGW100 questions
I have some plans to buy a NGW100. Is it right I only need a (sort of) JTAGICE to 'burn' a new firmware on it and not when i only want to try a program(running on linux)? Or has...
Saturday, 27 September 2008 - 11:26
Crystal VS clock? Wrong fuse
Ok, I am not the first person with this problem. I've a Attiny2313 with some wrong bit fuses. I programmed it to ext. clock mode. And I only have some crystal's. Is there an easy...
Tuesday, 10 July 2007 - 18:54
lcd wrong characters
I still busy with my line following robot, after an interrupt of a few weeks(read a month), I have the following problem: When I power-up my robot, the sensors are 'seeing' white...
Monday, 5 March 2007 - 15:19
Using shift register
For some experiments I want to use a 74HC595N shift register. I have to send my bits to the register and activate them. That's not very difficult, but I don't like the code...
Tuesday, 20 February 2007 - 22:25
Codevision fused all bits of ATmega8
I was trying to get my LCD working, a while ago. For the LCD I tried codevision, because I wanted to know the code code of codevision was working with my ATmega8. I programmed it...
Wednesday, 31 January 2007 - 18:48
ADC on LCD
Hi, before I buy a LCD with a HD44780 compatible controller. I want to know I can dispay a ADC value on that display? I think it is possible, but how? .... lcd_putsf(adcValue...
Tuesday, 19 December 2006 - 20:31
Always High
/* Include useful pre-defined functions */ #include // Defines pins, ports, etc to make programs easier to read #define F_CPU 100000UL // Sets up the default speed...
Thursday, 14 December 2006 - 16:25
Connecting 2x5 connector to Atmega8
Hi, For my project I've bought a Isp programmer(€7.95), but now I don't know how I have to connect that ISP programmer. I mean which pins to which uC pin? I have the following...
Monday, 16 October 2006 - 18:23
Line following robot, using IR
Hello, For a school project, last year project. I have to make something, a technical thing. My idea was to make a 'Line following Robot', I have searched on the internet for some...
Monday, 18 September 2006 - 13:13