Post Created date
Studio 4.08 loading event memory bug
I'm having no problems, did you install the new usb drivers correctly? -Geir
Sunday, 21 December 2003 - 14:27
Stack Monitor in AVRStudio 4
Hello, I think this is a feature for ICE40/50 only, and it it can break emulation if your data or program stacks grow/shrink out of bounds. It is configured in one of the pages in...
Saturday, 20 December 2003 - 15:09
AVR Assembler 1.73 - Warning caused of redefinition of regi
The example show that you assign the same name twice to one register, is that true for your application as well? In that case, it should be enough to assign the name once. I...
Wednesday, 10 December 2003 - 08:11
Studio Simulator UART
I don't think you can. -Geir
Thursday, 4 December 2003 - 08:19
Studio4.08 + USB to ICE50 = Failure
Online help = the help menu in the AVR Studio application. -Geir
Wednesday, 26 November 2003 - 16:32
AVR Studio 4.08 and C compiler??
You do get an assembler when you download AVR Studio. -Geir
Wednesday, 26 November 2003 - 09:06
Studio 4.08 project window problem
Hello Lyle. I've tried this with 4.08 and avr studio configured as tiny13 simulator. I used these steps: created an assembly project with a new assembly file using project->new...
Wednesday, 26 November 2003 - 09:05
Mega8: Blunder: I set "reset disable" fuse
The mega8 needs special consideration with regards to the BSEL2 and PJUMP jumpers, as described in the online help (the section on high voltage programming). Did you follow those...
Wednesday, 5 November 2003 - 08:57
Program Mega 16 Fuses with JTAGICE
Are you trying to do this while debugging? You have to leave debug mode to be able to open the programming interface, because they both (programming interface and debugger) need...
Friday, 24 October 2003 - 07:16
Program Mega 16 Fuses with JTAGICE
You can use the STK500 to set the fuses on mega16. It sounds like the JTAGEN fuse is unprogrammed, which would make the JTAGICE unable to connect. -Geir
Wednesday, 22 October 2003 - 07:33
Attiny & Stk500
Did you: Connect RST on PORTE to PB5 on PORTB. Connect XT1 on PORTE to PB3(XTAL1 on 2323) on PORTB. ? This is from the online help. -Geir
Saturday, 23 August 2003 - 18:54
Displaytreiberansteuerung mit I2C
AVR Freaks is not just a place where you ask your question and get an answer. Its also (and more importantly, I think) a knowledge base where you can search and get good...
Sunday, 1 June 2003 - 10:22

Pages