Post Created date
avr continuously reboot
Hi There! That line is not likely to cause reboot. The error must be another place. You should post the rest of your code. Regards gtoo
Friday, 27 September 2002 - 08:18
How much flash space used ?
Hi There! The .bss section is basically uninitialized variables. I.E. all variables that isn't given a value at declaration. unsigned char BSS_Var; unsigned char DATA_Var = 0x55;...
Thursday, 26 September 2002 - 12:06
How much flash space used ?
Hi There Alexander! That isn't correct. The amount of flash used is text + data section put together . The number stated in hex are all sections put together, text, data and bss....
Thursday, 26 September 2002 - 08:57
Possibly dead JTagIce ?
Hi There! There are a few things you should be avare of when upgrading the software in both the JTAG ICE and the STK 500. At least this is my experience after upgrading the five...
Monday, 23 September 2002 - 21:20
Can AVR working at the colock more than 11.0592 MHz?????
Hi There! The simple answer is that it depends on a few things. You can't run it on anything less than 5V. Since a few of the timings in the controller is based on clock ticks,...
Monday, 23 September 2002 - 08:30
EEPROM - AVRlib & Leitner Harald Docs
Hi there! I use all of the above without any warnings or errors. The reason you need casting is that the variable name itself is treated as a pointer and not an unsigned int. And...
Sunday, 22 September 2002 - 10:58
Problems in interfacing external SRAM
Hi There! As I suggested earlier, you could post your schematics for your design. I truly do believe that the problems you are experiencing is due to some hardware related...
Thursday, 19 September 2002 - 12:09
AVR-GCC and source files on different drives
Hi There! There are two things you could do here. The first is that you may have to change the cp coff/os_avr.cof to cp coff/os_avr.cof The second is that cp doesn't work very...
Thursday, 19 September 2002 - 11:59
[Q]Atmel Embedded Ethernet Tookit 1.3
Hi There! You upgrade by changing the ATmega103 with a ATMega128. It's pin compatable. I haven't actually seen the board except for the brochure. It looks like the board is...
Thursday, 12 September 2002 - 20:38
C Support in AVR Studio v4.05 ?!?
Just open the coff file and a project will magically be created. -Geir
Wednesday, 11 September 2002 - 07:25
GCC make error, help me!
Hi There! I think this is due to the fact that there allready exist an all: in the avr_make file which is located under \avrgcc\avrfreaks. Regards gtoo
Monday, 9 September 2002 - 14:27
ex ram inerfacing
Hi There! It is basically enough to set the SRE-bit in the MCUCR register. Care must be taken tough concering timing. You need to check if there is need to set up waitstates. You...
Saturday, 7 September 2002 - 23:52

Pages