Atmel START example: printf not working Thanks, Lars. I'm looking at the I/O window, filtering on SERCOM and looking at SERCOM2. I don't seem to be able to invoke multiple instances of AV7, so do you have any...
Programming EEPROM (ATMega1284P) It turns out the logger is already quite verbose - nearly 500K bytes of text from one attempt at programming and verifying the EEPROM!
Not sure I know what you mean by "...
Wednesday, 6 December 2017 - 21:21
Current USB drivers for Atmel JTAGICE MkII? Hi gchapman - yeah, I'd found that page. Has lots of good information; just nothing on actually obtaining said drivers. I also looked in my local installation of IAR, and I do...
Monday, 13 November 2017 - 15:07
Current USB drivers for Atmel JTAGICE MkII? Well, that did in fact make a difference. I now get: Failed to initialize USB driver: error 0x20000009 ("No valid license")
If they're referring to the IAR license, they're...
Saturday, 11 November 2017 - 00:03
Getting started with Atmel Studio Hi awneil -
I'm not turning a deaf ear to the idea of starting from scratch; I just wanted to preserve as much of the existing environment as possible. Anyway, I figured...
Thursday, 9 November 2017 - 17:05
Getting started with Atmel Studio OK, I'm going to give Atmel Studio 7 a go. My first attempt at importing a AS4 project failed - actually what I attempted to import was an .aps file. Here's the error:
...
Thursday, 9 November 2017 - 00:02
Getting started with Atmel Studio I'd love to. In fact, I'd love to chuck the lot, and go with a new version of IAR. (I've heard very unflattering things about AS7.) Unfortunately I'm stuck with AS4 for at least a...
Tuesday, 7 November 2017 - 17:28
Getting started with Atmel Studio Ahh...I wasn't aware that 3.5.4 was that much newer. I've inherited all of these tools and am still making sense of them.
Any opinion on the Atmel debugger vs. avr-gdb?...
Tuesday, 7 November 2017 - 17:11
Getting started with Atmel Studio Thanks, clawson...nice sticky. So...it appears that I could use either the gnu 3.5.4 toolchain I have a copy of, or I could download WinAVR and use what comes from that. Should I...
Tuesday, 7 November 2017 - 16:54
Getting started with Atmel Studio I'd like to return to this topic, if only for closure's sake.
So, I've been looking at some other, older threads about the problem that manifests with the warning:
...
They seem to be the same, at least where this information is concerned:
Thanks, Lars. I'm looking at the I/O window, filtering on SERCOM and looking at SERCOM2. I don't seem to be able to invoke multiple instances of AV7, so do you have any...
I encountered this problem a few weeks ago. As I recall, I used the Device Pack Manager to install the SAME54_DFP. Upon restart, AV7 recognized the device.
It turns out the logger is already quite verbose - nearly 500K bytes of text from one attempt at programming and verifying the EEPROM! Not sure I know what you mean by "...
Hi gchapman - yeah, I'd found that page. Has lots of good information; just nothing on actually obtaining said drivers. I also looked in my local installation of IAR, and I do...
Well, that did in fact make a difference. I now get: Failed to initialize USB driver: error 0x20000009 ("No valid license") If they're referring to the IAR license, they're...
Hi awneil - I'm not turning a deaf ear to the idea of starting from scratch; I just wanted to preserve as much of the existing environment as possible. Anyway, I figured...
OK, I'm going to give Atmel Studio 7 a go. My first attempt at importing a AS4 project failed - actually what I attempted to import was an .aps file. Here's the error: ...
I'd love to. In fact, I'd love to chuck the lot, and go with a new version of IAR. (I've heard very unflattering things about AS7.) Unfortunately I'm stuck with AS4 for at least a...
Ahh...I wasn't aware that 3.5.4 was that much newer. I've inherited all of these tools and am still making sense of them. Any opinion on the Atmel debugger vs. avr-gdb?...
Thanks, clawson...nice sticky. So...it appears that I could use either the gnu 3.5.4 toolchain I have a copy of, or I could download WinAVR and use what comes from that. Should I...
I'd like to return to this topic, if only for closure's sake. So, I've been looking at some other, older threads about the problem that manifests with the warning: ...
Pages