Post Created date
Viewing CR, LF, and CRLF inside Atmel Studio's Editor? - SOLVED
meolsen wrote:...the extension needs to confirm support for Atmel Studio in the extension manifest. As it works in 2015 I would expect it to just work, but it needs to be added to...
Thursday, 19 April 2018 - 17:05
Viewing CR, LF, and CRLF inside Atmel Studio's Editor? - SOLVED
awneil wrote: so probably easiest to just use Notepad++ (or whatever) when you need this feature.   That's my path right now.  Notepad++ works how I want AS to work....
Thursday, 19 April 2018 - 15:43
Viewing CR, LF, and CRLF inside Atmel Studio's Editor? - SOLVED
clawson wrote: You are probably going to need an extension from the gallery for stuff like that.   That's where I started.  "End of the Line" extension works great...
Thursday, 19 April 2018 - 15:34
Viewing CR, LF, and CRLF inside Atmel Studio's Editor? - SOLVED
Yeah not so much inside text strings delimited by pairs of double quotes.  I'm interested in seeing the actual CR, LF, or CRLF terminators at the end of every line of source...
Thursday, 19 April 2018 - 15:01
microchip_gallery.8.0.0.vsix Installation Failed
Under Windows 10 the VSIX installer fails without any messages if your Windows username has a space in it.  Create a second user account without the space and try again....
Wednesday, 18 April 2018 - 23:19
SAMD21E - USART - IR transceiver receives its transmitted messages
I've found full duplex messaging via IR in air is next to impossible.  Transmissions via non-focused light goes everywhere, and is reflecting back into your receiver. ...
Monday, 16 April 2018 - 16:31
ASF4 without START
Nope, not available offline for ASF4.  I ran into this problem when trying to add modules as a second phase of a project.  The original project was built with an early...
Tuesday, 27 March 2018 - 18:51
How to reserve area in flash using Atmel Studio IDE
Look under "ARM/GNU Linker->Miscellaneous" for the "Linker Flags" text box.  There should be a "-Tsame70q20_flash.ld" or the like for your processor.  This is a file...
Friday, 16 March 2018 - 14:14
Glitch and Debounce Filter configuration
Jack Ganssle wrote a pretty good article about software debouncing here: https://www.embedded.com/electro...   The trick is to shift the edges through a variable of...
Monday, 12 March 2018 - 21:53
Difference between #define and Define symbols (-D)
Use -D when you want to change the compile time characteristics without changing the source code.  For example, Release mode versus Debug mode uses -D values.  I like to...
Wednesday, 7 March 2018 - 21:03
SAME strange behaviour when subjected to ESD testing
The Ethernet port grounding on Ateml's SAME70 Xplained board is wrong.  Both sides of the isolation are tied to a common ground defeating the purpose of isolation.  We...
Tuesday, 6 March 2018 - 16:10
Atmel Start doesn't allow all pin combinations for SERCOM
justyn wrote: but it is unfortunate that the restrictions aren't made clearer in the particular SERCOM sections of the datasheet for people who are new to the device...
Friday, 23 February 2018 - 16:17

Pages