Post Created date
AS7 High CPU Usage When Opening a Large SAM4E Project
Visual Assist - play with these settings, they look promising...  
Thursday, 24 May 2018 - 15:10
AS7 High CPU Usage When Opening a Large SAM4E Project
So mine is not exactly zippy fast, but nowhere near what you describe.  I ran process monitor after a fresh reboot and starting a fairly large AS project.  The one thing...
Thursday, 24 May 2018 - 14:26
AS7 High CPU Usage When Opening a Large SAM4E Project
From the screenshot it looks like the project is on your R: drive.  Is this a network drive?  Loading my local projects running off a SSD are much faster than hitting a...
Thursday, 24 May 2018 - 12:59
Pushbutton on SAME70
Yes.  Take a look at the schematic for the SAME70_XPLD board.  SW300 (User Button) is connected to GPIO pin PA11.  There's also test probe TP300 right next to it...
Tuesday, 22 May 2018 - 17:56
Syntax for function calls.
Try casting it to the data type like this: answer = addTwoInts((twoInts){20, 20}); 
Monday, 21 May 2018 - 21:15
Multiple CDC's with USB and ASF4/START (ie. two virtual comm ports over USB)
Nope, gave up trying.  I ran into other problems with START/ASF4's USB driver as well - doesn't work reliably at high speed mode (480Mbps).  Only full speed mode works...
Friday, 18 May 2018 - 15:01
Warning "LITTLE_ENDIAN" redefined
Resurrecting this thread.  I just tried to do a START update on my project and I'm getting the "LITTLE_ENDIAN" redefined error.  Traces back to endian.h in the toolchain...
Wednesday, 16 May 2018 - 22:13
SAME70 Timer Counter 2-bit Gray Counter
Take a closer look at the tc_init() function parameters which eventually setup the channel mode register (TC_CMR).  I don't see any reference to TC_CMR_BCPB_SET or...
Wednesday, 16 May 2018 - 15:36
ATSAME70: which initialization tool to use?
Atmel's START (aka ASF4) is a web based GUI front end for a source code template generator.  You select the modules you want, configure them, then press the "go" button and...
Monday, 14 May 2018 - 13:23
nonvolatile GPNVM bits are missing in AS7
Works fine in Atmel Studio 7.0.1645.  What version are you using?
Thursday, 10 May 2018 - 20:34
SAMD21 xplained Pro 4x4 keypad
Take a closer look at Row 3 and Row 4.  The row is set TRUE, checked, then set TRUE again.  Rows 1 and 2 are different - set FALSE, checked, returned to TRUE.
Thursday, 10 May 2018 - 17:59
SAM High speed USB - how fast is it, really?
What version of ASF are you using?  I had problems getting high speed mode working reliably on a SAME70 with ASF4/START due to a buggy driver (480Mbps).  Full speed mode...
Wednesday, 9 May 2018 - 14:29

Pages