Post Created date
Ethernet with SAME70
Without seeing your source code or diving too deeply into the lwIP drivers, it sounds like a big-endian versus little-endian problem.  By definition Ethernet packets and TCP/...
Monday, 21 January 2019 - 18:08
Atmel Start ... sigh.
I wholeheartedly agree!   To work around a lot of those problems I find myself loading the project back into START, making changes or adding components, exporting the source...
Friday, 18 January 2019 - 17:35
AS7 High CPU Usage When Opening a Large SAM4E Project
Your timing is awesome.  I'm seeing this same problem now.  I've recently added GMAC support and lwIP to get TCP/IP into my SAME70 project.  The file count has...
Thursday, 17 January 2019 - 14:13
reconfigure START for a different processor?
Yeah, it stinks.  START is a decent concept but only for starting a project.  It gets difficult to add or change things in the middle of a project.  It gets worse...
Wednesday, 16 January 2019 - 19:12
eeProm written to before getting past main()
Every time you exit the debugger it restarts the processor, adding one to your counter.   For example, the current value in the middle of a debug sessions is 13.  Quit...
Wednesday, 16 January 2019 - 18:50
reconfigure START for a different processor?
I've found the easiest is to create a new project as a custom board and add the components from the example.  It works best by bringing up two browser windows, one with the...
Wednesday, 16 January 2019 - 14:55
How to clear ISR for individual pin?
This is an ARM architecture issue, not a Atmel SAM E70 specific issue.  For ARM Cortex-M7 processors, pins are grouped into ports.  On the SAM E70 there are five...
Tuesday, 15 January 2019 - 19:37
MAC Addresses: down-converting EUI-64 to EUI-48?
So we reached out to our local Atmel/Microchip rep.  Their answer is NO, shortening a EUI-64 down to a EUI-48 when the middle bytes are something other than 0xffff or 0xfffe...
Friday, 4 January 2019 - 16:27
SAMD21, AS7, ASF3.44: Complier setting
The -std=??? option allows you to define which standard the compiler conforms to when generating code.  The default with Atmel projects is -std=gnu99 which includes GNU...
Friday, 4 January 2019 - 13:58
Atmel Studio for SAMD21G18, how to supress warning.
Have your tried casting away the problem?  Since the call is inside a callback from an interrupt, dropping the volatile qualifier via the function call is not a problem....
Friday, 28 December 2018 - 15:59
SAME70 HSMCI SD low data throughput
I'm seeing speeds closer to 3.4 MB/s read, 3.2 MB/s write using the Atmel START raw demo, a SAM E70 Xplained board, and a 8GB SDHC card.     Download the...
Wednesday, 26 December 2018 - 16:23
SAME70 HSMCI SD low data throughput
Try using the demo from Atmel's START aka ASF4 via http://start.atmel.com, specifically the SD MMC Raw Example.  
Friday, 21 December 2018 - 21:53

Pages