Discussion Title | Created date |
---|---|
Help locating newlib source code I'm tracking down a problem in my project from code generated by Atmel START using the USBHS module for a SAM E70 chip. It's hard faulting inside the hpl_usbhs.c during a... |
Tuesday, 10 March 2020 - 22:23 |
Terminating an Active Debug Session Using Code (Processor Side) I've added code to my SAME70 project to self-set the security bit and reboot. The code works as expected. But if I happen to execute this code during a debug session,... |
Monday, 10 February 2020 - 17:51 |
MAC Addresses: down-converting EUI-64 to EUI-48? I'm using an AT24MAC602 serial EEPROM with a built in factory programmed by Atmel EUI-64. Unfortunately the application needs IPv4 not IPv6 so I need to down-convert the 64-... |
Thursday, 3 January 2019 - 23:28 |
Viewing CR, LF, and CRLF inside Atmel Studio's Editor? - SOLVED Simple question, maybe not so simple answer. How do I see the line ending characters inside Atmel Studio's editor? In Notepad++ I can view line endings via the menu... |
Thursday, 19 April 2018 - 14:10 |
Multiple CDC's with USB and ASF4/START (ie. two virtual comm ports over USB) I'm using ASF4/START with a current project that includes USB and the CDC class setup as a single virtual comm port. All is well. I'd like to modify my project by... |
Thursday, 14 December 2017 - 15:16 |
Default SAME70 Hard Reset Main Clock Frequency is 12MHz RC not 4MHz RC I'm seeing strangeness on my SAME70 clock on a hard reset after power is first applied. I'm expecting the processor to boot using the 4MHz internal RC oscillator, but it... |
Friday, 3 November 2017 - 14:51 |