Post Created date
16 bit microcontroller
To get into the 32 bit ARM Cortex uC. I downloaded Ride 7 and it is similar to AVRStudio in a way, free, C compiler, simulator. You must purchase the programmer though ~$70. It...
Thursday, 2 July 2009 - 13:40
Nevermind, I took off the black tape on one end of the cable and folded the exposed conductors to the correct side. Works!!!
Tuesday, 30 June 2009 - 19:27
where can I get a replacement form my mkII, I recently bought HFF-30U-06-ND from digikey to only find out that wires are reversed. Then I found this post.
Tuesday, 30 June 2009 - 19:10
I generally make my own bootloader, so that I can integrate the protocol with my main application protocol using proprietary packets in the application. I have the bootloader...
Monday, 29 June 2009 - 20:10
Best Way to Get started with an ATXMEGA?
I always do the bootloader first, that way it gets tested when I update the application several times during developement (unless it needs to be debugged). I will use the same...
Thursday, 25 June 2009 - 12:42
ID Factory Programmed for unique identify
DS2401 1-wire Serial Number
Monday, 22 June 2009 - 20:28
Xmega and SDRAM
I was wondering SDRAM, not SRAM.
Friday, 5 June 2009 - 19:25
You will need a timer/event system/DMA/DAC to do this. I have done it using a sine wave.
Friday, 5 June 2009 - 16:24
Oh no...Not Again!!
Try another chip or bend the pin out, and then put it in the socket, then measure the pin (when it's floating).
Thursday, 4 June 2009 - 12:24
I killed my XMEGA32
What about accessing the chip using the JTAG port?
Wednesday, 3 June 2009 - 12:33
I killed my XMEGA32
Atxmega64A1 with BOD enabled is okay!
Tuesday, 2 June 2009 - 20:34
Have you ever written code for the Xmega?
I ordered a couple ATxMega64 100 TQFP from digikey. I took one of the boards that I designed for a regular atmega1280 and cut all the traces around the footprint. I then added...
Tuesday, 2 June 2009 - 19:13