Type in the full discussion title or a part of it.
Discussion Title Created date
EVK1105: Can't read PHY
Hi, I'm testing my ethernut port to AVR32 using the EVK1105. Previously I used the EVK1101 with the A0512-ES chip and my network code was working really well. With the...
Monday, 18 January 2010 - 02:29
Windows 7 x64 drivers
Hi, I'm having some trouble installing the drivers for the AVR One in Windows 7 x64. Windows says that there is a problem with the .inf from the driver. I removed and...
Saturday, 9 January 2010 - 15:21
AP7000 flash write/erase problems
Hi, I have a design with AP7000 and AT48BV640D flash and it works quite well except for some problems with erase and program in the flash. Using the JTAGICE mkII I'm able to...
Thursday, 6 August 2009 - 14:52
Setup flash timing
Hi, I have a custom board using AT49BV640D instead of the AT49BV642D as the NGW. I'm having some trouble setting up the flash parameters in the kernel (flash.c) How does one...
Sunday, 26 July 2009 - 14:34
[Rant] Atmel developers: Please submit code upstream
I work with upstream buildroot when I have the time to, from where atmel feels free to pull changes from, which is perfectly ok and desireable. We also try to support AVR32 in the...
Monday, 6 April 2009 - 21:19
AP7000 and USB OTG
Hi, It was my understanding that the AP7000 had USB OTG interface. But it doesn't have an USB ID pin like the UC3 0512 has. Did it got changed and AP7000 no longer have USB OTG...
Wednesday, 25 February 2009 - 17:43
Problem with NGW100 + jtagice mk II
Hi, I'm having some trouble programming AP7000 boards with the JTAGICE MKII. I always get this message: Quote: C:\>avr32program reset Connected to JTAGICE mkII version 5.44, 5...
Saturday, 14 February 2009 - 05:24
Memory banks with 32bits data/address width
Hi, Is it possible to use more than one 32 bits memory chip with AP7000? I'm trying to help our hardware guy but neither of us can understand how this should be accomplished. One...
Thursday, 15 January 2009 - 19:55
Port ethernut to AVR32
Hi, I've started porting ethernut to AVR32 and wonder if anyone else here is interested. I'm working on UC3, but I'm open to AP7000 suport as well. Please stop by at http://...
Tuesday, 6 January 2009 - 05:09
STK1000 motherboard/daughterboard connector part number
Hi, I'm looking for a high density connector for a motherboard/daughterboard design similar to the STK1000 kit. But I can't find the part number for this connector anywhere,...
Wednesday, 31 October 2007 - 14:27
2.6.22 - Unable to mount root fs.
So, I had 2.6.18 and just now upgraded to 2.6.22 and applied atmel.3 patches. Now I can't mount the rootfs, it says it doesn't know the block device Quote: VFS: Cannot open root...
Sunday, 12 August 2007 - 22:44
STK1000 default running clock
Hi there, I was just about to ask if changing the stk1000 cristal was the way to reach the 150Mhz cited in the datasheet and atmel site, but I figured on other posts that there...
Tuesday, 31 July 2007 - 03:16

Pages