Type in the full discussion title or a part of it.
Discussion Title Created date
Solved: Temperature reading through ADC
Hi,   I'm working on a project where I have connected the temperature sensor(LM35) to ADC0(23rd PIN) of ATMEGA168.  I get the ADC value and push it through UART. I use...
Wednesday, 19 December 2018 - 11:35
PIN CHANGE INTERRUPT
Hi, The following code has an external interrupt(which is a button on PD2).When the button is pressed an ISR is enabled  which increments the variable and prints its value...
Thursday, 12 October 2017 - 05:46
UART is not transmitting until it receives
In this program UART does not transmit "ATE0".I check the output through cool term. #include <avr/io.h> #include <string.h> #include <util/delay.h> #define...
Friday, 15 September 2017 - 08:28
UART new line issue
HI, I have a simple code that receives and transmits string through UART. I use ATMEGA 168. So according to my code I transmit a string using cool term and the controller receives...
Thursday, 14 September 2017 - 07:40
Solved: Water flow meter
Hi, I am trying to convert the following code <http://diyhacking.com/projects/F... from Arduino IDE to AVR studio.The program is used for measuring the amount of water flowing...
Friday, 1 September 2017 - 05:42
EXTERNAL CLOCK SOURCE FOR TIMER
How do I give external clock source to timer of ATMEGA 328p ?I am using TCS3200 output frequency as clock source for the atmega timer. The timer is supposed to stop at every 1s...
Thursday, 10 August 2017 - 05:43
Split from: External clock maximum frequency
HI, I want the timer of Atmega 328p to use the output frequency of TCS3200(light - frequency sensor) as its external clock source.I expect the clock to stop at every 1s and print...
Thursday, 10 August 2017 - 05:08
ATMEGA 168 I/P
HI, So I want to change the duty cycle  to 50% of an LED connected to PORTB .The input is being given in PORTD. So if there's an input in PORTD then the LED should glow at 50...
Monday, 26 June 2017 - 06:49