Type in the full discussion title or a part of it.
Discussion Title Created date
NiMH charger question
I have been given the remains of a toy R/C airplane which runs (ran) on NiMH batteries. It gets recharged in the field for a few minutes from a battery pack, then supposedly flies...
Friday, 13 September 2013 - 22:56
How smart is this thing likely to be?
I was in the grocery store yesterday and they had some closeout Christmas stuff, so I bought a toy light and charger for $1. Taking it apart it has two or so square inches of...
Wednesday, 25 January 2012 - 22:42
Wanted: old geezers and their opines
Around Christmas I found out that Washington State has a law requiring colleges and universities receiving public funding to waive tuition for us in the over 60 crowd. Up to 2...
Friday, 4 March 2011 - 03:39
AGC for telephone recording
A couple of times a year I have a telephone consultation that I record and transcribe for both of us (with the permission of the other person). Over the years I have used a couple...
Saturday, 13 November 2010 - 06:46
Sure Electronics AVRDEM2 board code
I've posted a project giving example code for all the goodies on a Sure Electronics AVRDEM 2 board (about $26, shipping paid, if you watch eBay). That includes a USART, switches...
Tuesday, 21 September 2010 - 07:15
Butterfly LCD & damage from alternate pin use
I had someone ask me a question that I need to refer on to the EEs. In the Butterfly, the LCD segment pins are shared with general I/O port pins, but the LCD is hard wired in...
Wednesday, 22 July 2009 - 19:54
[TUT] So I got a Butterfly - Now what?
Attached is a little introduction to the Butterfly for new users. It includes the way to use AVR Studio to upload hex files via the Butterfly's serial bootloader, and some...
Thursday, 16 July 2009 - 23:18
[TUT] [C] Stepper motors - real time dynamic ramping
I came across a nice article about dynamic ramping with some PIC example code, and got to playing with it. One thing led to another, and here is a restatement of the paper's...
Wednesday, 6 May 2009 - 02:40
[TUT] Interfacing 2 bit rotary encoder switches
This is a discussion of well behaved (YMMV), interrupt driven, rotary encoder switch interfacing.
Tuesday, 24 February 2009 - 03:12
[VB6][SOFT][CODE] Smiley's USB Thingie and VB6
As many of you know, Smiley (in collaboration with Jesper) has produced what I've been calling the USB Thingie based on the FTDI FT232R chip. Smiley has written a book on its use...
Tuesday, 4 March 2008 - 23:43
Hot Wheels Radar Gun serial interface
I posted a project yesterday showing how the Hot Wheels Radar Gun works and implementing a serial interface for it. Since that time a double epiphany has struck me, one for an...
Tuesday, 9 October 2007 - 02:02
Problem with ISP in existing hardware
As some of you know, Daqq pointed out the Mattel Hot Wheels Radar Gun which I have proceeded to spend way too much time on. I have it reverse engineered and am ready to give all...
Monday, 24 September 2007 - 09:07