Post Created date
Opinions requested: Use SPI or code with AVR?
Ok, now I'm really hearing what I needed to hear, the reason I posted this question. Specifically I'm hearing from people who know, already (and who are willing to share that...
Wednesday, 29 October 2008 - 12:07
How to replace device on STK500
Lest anyone get the wrong impression, I am making the assumption that evenflow read the manual but found it said nothing about how to get the ic back out of the 40 pin socket,...
Wednesday, 29 October 2008 - 11:36
Opinions requested: Use SPI or code with AVR?
I'm hearing you all. I'm hearing many valid points. It's sounds to me like you all are seeing things the way I am. There are advantages and there are disadvantages in either...
Wednesday, 29 October 2008 - 02:23
Opinions requested: Use SPI or code with AVR?
Quote:If one followed your philosophy you might as well forget microcontrollers all together and the I2C, SPI, ADC, UART, EERPOM, etc. and just bit-bang everything on GPIO pins...
Tuesday, 28 October 2008 - 11:02
Opinions requested: Use SPI or code with AVR?
Added note: That's the main selling point with me with regards to the AVR. It doesn't cater to the most common denominator (high-level language) and forget the least (machine...
Tuesday, 28 October 2008 - 10:58
Opinions requested: Use SPI or code with AVR?
Quote:Why would you do software SPI when you have dedicated hardware to do it for you? "Figuring out" means a learning curve is involved. It takes time to read the rules (SPI or...
Tuesday, 28 October 2008 - 10:40
How to replace device on STK500
Hint1: Ease it out using a small flat blade screwdriver, twisting it gently back and forth, a little on each end of the device until you can safely pop it out without bending up...
Tuesday, 28 October 2008 - 02:55
How to measure SIN wave in ADC
Quote:Yes, offset in the voltage seems to be the best answer, but what kind of information I must look for in the net? Because I looked for "offset control with opamp", but I only...
Tuesday, 28 October 2008 - 02:45
include files device descriptions are where?
Wow! Thanks so much for continuing to respond even though the thread has started to drift off topic! I have another question now, but I won't continue to pull this thread...
Tuesday, 28 October 2008 - 02:07
include files device descriptions are where?
Yep, that's what I wanted. Thanks! Now my next quest is to figure out why Assembler2 would have advantages over (what I'm guessing is the first) Assembler and what the difference...
Monday, 27 October 2008 - 10:03
Help! I can't upgrade my STK500 of years ago!
Ok, I think I got it upgraded now, but I never could get that AVR Prog program past the error window. Here's what I did: Tools/Program AVR/Connect... This caused a window to pop...
Sunday, 26 October 2008 - 03:23
Out of date STK500 manual. Need current compatibility list.
In case there are others who might stumble across this thread, I just found what I need: AVRStudio Help/Introduction/Tools and Device Support There's an up to date list of what...
Saturday, 25 October 2008 - 17:23

Pages