Type in the full discussion title or a part of it.
Discussion Title Created date
Argh! Point me to the unconfuzificator!
I've been happily working with AVR's for some time now. Recently, I've decided that I should at least evaluate if the AVR32 UC3B's are a better choice for some of my applications...
Wednesday, 2 December 2009 - 00:03
Document for avrasm and avr-as differences?
Is there such a thing as a docment that details the differences between avrasm as it ships in AVR Studio and Gnu avr-as? TIA -dave
Saturday, 2 August 2008 - 20:53
Weakest reliable pull down?
Hi all... I'm trying to cheap out and make one I/O pin do too much. Situation normal so far. Anyway... I'm contemplating how weak of a pull-down I can get away with and still get...
Friday, 4 January 2008 - 07:22
Best way to abuse I/O port current spec?
I want to drive the coils of a latching relay from an AVR. The spec on the relays is 45mA, nominal, during the switching pulse. These are dual-coil DPDT latching relays, so you...
Wednesday, 18 April 2007 - 22:03
programming multiple parts on 1 board with 1 ISP connector
OK, so I think this has been talked about before, and maybe even recently, but search didn't turn up anything. If I have multiple AVR's on one board, how can I program them all...
Friday, 6 April 2007 - 22:24
Q about adding mega325 to AvarICE
I want to add mega325 support to Avarice for use with gdb. Is it really as easy as simply believing the comments in jtag.h and pulling the corresponding stuff from the XML files...
Friday, 30 March 2007 - 17:07
How to add device to Avarice?
Looking at the .c code for Avarice, I see: 1) that it doesn't support a couple of the parts I bought to experiment with (should have checked earlier...), and: 2) At first glance...
Thursday, 3 August 2006 - 04:48
Slightly OT: symbols for geda and pcb?
Well, I have a pile of data sheets, a pile of parts in unopened poly bags, a programmer, the avr-gcc tool chain seems to be at least minimally alive, and gschem and pcb both seem...
Sunday, 30 July 2006 - 02:42
jtagice mkii vs. avrisp mkii -- confused n00b here
Ok, please pardon the lame newbie question, I'm just getting started with Atmel parts. I've decided to plunk down the bucks for a JTAGICE MKII, so that (as I understand it) I can...
Wednesday, 19 July 2006 - 19:19
Basic avr-gcc install question - Linux
Hi, Just getting started and have a basic install question. If this is not the correct forum, please whack me (gently :) with a clue stick. I am trying to install avr-gcc, and...
Friday, 14 July 2006 - 06:43