Post Created date
Reading 6-channel receiver signals
May be one 74hc00 or 74hc02 can help 1 4 ch -> 1 gate -> INT0 2 5 -> 2 -> INT1 3 6 -> 3 -> INT2
Tuesday, 3 March 2009 - 16:32
How to make .COF in WinAVR example stdiodemo
clawson wrote:I just went to a project that uses an Mfile created Makefile and typed "make coff" it built and output the file just as expected. This project ? WinAVR\doc\avr-libc...
Tuesday, 3 March 2009 - 16:14
Reading 6-channel receiver signals
inktomi wrote:I'm going to use an Atmega32 You can use AVR like ATmega48 -88 -168 or ATmega164 ATmega324 ATmega644 or some attiny and so. Thay have many pins with int (PxINT) by...
Tuesday, 3 March 2009 - 11:48
How to make .COF in WinAVR example stdiodemo
david.prentice wrote:but perhaps he wants to use a debugger that only recognises .coff That is rigth ! VMLAB eats only COF. david.prentice wrote:I have just tried "make coff" and...
Tuesday, 3 March 2009 - 11:43
How to make .COF in WinAVR example stdiodemo
EW wrote:Look at the WinAVR Makefile Template under the \sample directory. It has rules to generate COFF files. In the 1-st post I've mantion it !
Tuesday, 3 March 2009 - 07:51
How to make .COF in WinAVR example stdiodemo
stu_san wrote:Our mind-reading machines are all broken. :lol: :lol: :lol: stu_san wrote:Please read Help, My "..." Doesn't Work! Please read my post carefuly ! I do not...
Monday, 2 March 2009 - 16:51
How to make .COF in WinAVR example stdiodemo
I've done it and then project stdiodemo not compiled with heap of errors.
Monday, 2 March 2009 - 14:28
How to make .COF in WinAVR example stdiodemo
clawson wrote:If you've found something that mentions COFF then it is very, very old. The preferred debugging format these days is Elf/Dwarf2 which is generated by the compiler...
Monday, 2 March 2009 - 13:26
How to simulate int flag ICF1 ? I try AVRstud VMLAB PROTEUS
Thank you !
Saturday, 14 February 2009 - 18:59
How to simulate int flag ICF1 ? I try AVRstud VMLAB PROTEUS
Any ideas ?
Saturday, 14 February 2009 - 09:14
How to simulate int flag ICF1 ? I try AVRstud VMLAB PROTEUS
Timer setup iar 5.20.2 demo //Set timer 1 in "Phase correct mode". TCCR1A = (1 << WGM11); //Set top value of Timer/counter1. ICR1 = 0xff; TCCR1B = (1...
Thursday, 12 February 2009 - 17:53
How do I read a single pin?
AgentH wrote:if (PIND0 == 0) PIND0 change to (register & (1<<bit_number)) or (register & bit_name) for PIND3 (PIND & (1 << 3)) equal to (PIND & PD3)
Monday, 2 February 2009 - 19:45

Pages