Post Created date
Is AVR Studio going to be phased out in favor of MPLAB?
its pretty much obvious that after a while MPLABX will be the ONLY development platform, but will takes years for sure IMHO no more version than STUDIO7 will be developed, but for...
Friday, 4 January 2019 - 21:50
the general idea is that when a keypress is detected, you start a timer, after timer overflow if it still pressed . . its a longpress   however if you stuck somewhere, just...
Wednesday, 26 December 2018 - 20:09
Wireshark debugging of packets not destined for the PC
if you cannot find a hub anymore, maybe this would help
Wednesday, 26 December 2018 - 15:56
USBAsp trouble
imho since it is recognized correctly from windows , programming of mega8 is ok.   most probably, the connection between usbasp <> AVR is corrupted OR avr to be...
Tuesday, 25 December 2018 - 10:34
since longterm, obviously AtmelStudio was going to be abandoned and MPLAB was going to be the all in one official DevelpmentIDE it is make sense in term of Studio (now it says "...
Monday, 19 November 2018 - 20:41
uart without crystal at newer ATTinys?
it does NOT have external crystal all this "1" series, AFAIK you can use some gates to get clock out of crystal, but erally does not really matter :)   as already said prefer...
Saturday, 10 November 2018 - 19:58
Using Attiny85 Reset Pin as PCINT
plouf wrote: if you are trying to DISABLE resetbit AND have disabled flashprogramming it will fail try NOT to protect FLASH , and THEN disable resetbit with ISP, it will work...
Thursday, 23 August 2018 - 17:42
Studio 7 fails install with "Microsoft Visual Studio 2015 Shell (Isolated)"
thanx   finaly isolated shell installed successful ONLY after I , ) Reinstalled BOTH Visual C++ redistributable (x86) & (x64) )Uninstall both ) install again isolated...
Sunday, 19 August 2018 - 02:27
AVR Studio on Linux
dont know orignal answer but   maybe you have to wait....... enough until mplabx realy get's true AVR support :) as soon or later will get it !
Saturday, 23 December 2017 - 20:16
AVRA installation
awneil wrote: avrmiso wrote: Master's thesis which requires me to include some atmel assembler command-line tool in my software bundle. Therefore, I need something opensource...
Monday, 4 September 2017 - 07:59
Come Join Us (MPLAB Now Supports AVRs)
meolsen wrote: Can you confirm that that's a half-baked loaf of bread as for now Yes. It's there for those that knows. When you know, you should be able to use it (and if you can...
Tuesday, 22 August 2017 - 18:05
Come Join Us (MPLAB Now Supports AVRs)
clawson wrote:It took about 4 years and 3 versions : studio 5, 6, 7 before that got reasonably OK so does anyone think this transition will be any less painful? definitely not,...
Sunday, 13 August 2017 - 18:43