Post Created date
328P wakeup with USART PCINT2-Interrupt - wakeup works, interrupt doesnt
avr-mike wrote: The interrupt was already getting executed, but because the flag was not specified as volatile, the interrupt routine was not modifying it.   --Mike   I...
Thursday, 9 May 2019 - 06:09
328P wakeup with USART PCINT2-Interrupt - wakeup works, interrupt doesnt
avr-mike wrote: Add volatile to the definition of:   volatile bool BTWakeupRequest = false;  --Mike     Hi Mike,   in the original code, this is what i...
Thursday, 9 May 2019 - 03:42
Solved: U8G2 causes high power consumption while powerdown - Atmega 1284P
Found the cause:   Some output pins were high.
Monday, 11 February 2019 - 08:10
Solved: U8G2 causes high power consumption while powerdown - Atmega 1284P
I tried to put it to sleep but that doesnt work. I cut off the display Vcc anyway.   Omg i just found out that it really consumes power... but only if u8g2 has been...
Sunday, 10 February 2019 - 15:52
ATmega communication with FS100A
I have a FS1000A too, if timing or signal stability is an issue, you better take IR-Leds if you have. Mine wasnt very good at 50cm ! Maybe it is a tuning issue. But i tried also...
Sunday, 10 February 2019 - 14:55
Get more Flash-/RAMusage out of a ATMega32u4?
A few days ago my PCBs and the atmega 1284p arrived. It works quite good. Just a little pain that not OC1A is on pin 8 instead of pin 9. So it isnt completely combatible to a...
Friday, 1 February 2019 - 20:39
Variable gets incremented without doing this in the code.
Bloody Google brought me to the bloody german Wikipedia site which is bloody unstructured and i couldnt find ada.... Usually i keep an eye on those arrays since i am aware of the...
Thursday, 24 January 2019 - 13:37
Variable gets incremented without doing this in the code.
What is Ada?  
Thursday, 24 January 2019 - 11:02
Variable gets incremented without doing this in the code.
Problem solved. I just mixed up the index of the array. Jeeez... while trying to find an error i introduced another one....
Thursday, 24 January 2019 - 10:38
Variable gets incremented without doing this in the code.
ajcashin wrote: I do not understand your problem. What do you expect to happen. What was observed to happen. Well... if i dont increment it should not increment...  
Thursday, 24 January 2019 - 09:52
Variable gets incremented without doing this in the code.
ccrause wrote: Perhaps the binary/hex you upload is out of date?  I've had similar issues when: 1. Binary upload happens before linker is done 2. Compiling one profile (e.g....
Thursday, 24 January 2019 - 09:52
input capture interrupts starts late - TCNT1 is reset to late.
Yes it is. I had a look at the assembler. I did not know about this. Hail to the compiler
Thursday, 24 January 2019 - 08:53

Pages