Post Created date
ATTiny416 acting as TWI/I2C slave device, failure on second read.
Hi pblase,   Jim said it correctly. Master sends a NACK to slave to indicate the end of transaction just before STOP. Slave should not send a byte for the NACK...
Tuesday, 16 April 2019 - 05:58
FreeRTOS TCB_t is conflicting with Timer TCB_t
Thank you!  I was looking for a C code solution. Fortunately, I got this from atmel START example - http://start.atmel.com/#example/...   /* * #define TCB_t...
Sunday, 20 January 2019 - 09:39
FreeRTOS TCB_t is conflicting with Timer TCB_t
Is it fine to edit the source? I was looking for a better way to do it(if there is any), to avoid renaming. If we want to rename it, which would be the preferred one? device...
Wednesday, 9 January 2019 - 11:09
High impedance state ( HI-Z ) on XMega
To make a pin Hi-Z, xmega needs all these,   1. make DIR as input 2. set OUT as low 3. Disable digital input buffer in PINnCTRL.ISC 4. make the pull setting to TOTEM in ...
Tuesday, 20 November 2018 - 10:17
How to clear RXACK flag in TWI slave of tiny817?
Hi @jbug11,   Thanks for the response!   Actually, I cannot control the master receiver. I'm using USB I2C clickboard as a reference master device. That gives a NACK...
Tuesday, 27 February 2018 - 18:16
ATmega328P Xplained and Atmel Studio 7.0.1417
Hi trevorg,   Is the device properly detected by AS? How did you test Virtual Com?
Wednesday, 16 August 2017 - 16:41
How to Program part with 1 button press instead of 4
Hi GeorgeIoak,   You can actually use Start Without Debug option under debug (CTRL+ALT+F5). Or directly this button.
Thursday, 6 July 2017 - 06:49
Atmel Studio 7: Controller missing in Include File
Hi GroundBounce ,   Is it safe to do that? Are the other include files for ATmega88PA and ATmega88P identical - espcially register definitions?   According to ...
Wednesday, 5 July 2017 - 05:01
comparing a char to a value in a char array
@v8muscle383  If your gpsCharArray is starting without comma ,like this ----> 123519,4807.038 ,your code will get stuck at first character. Because ,'i' is not...
Thursday, 25 May 2017 - 06:09