Discussion Title | Created date |
---|---|
Getting garbage output in serial monitor while communicating with OBD using CAN interface(MCP2515) and nodemcu(esp8266) Hi,OBD 2 and CAN is completely new to me. I am programming nodemcu using Arduino IDE and using this library for working with CAN. Here is a simple example program which I am... |
Tuesday, 14 August 2018 - 12:06 |
Choosing a right appropriate led display driver hello everyone. im currently working on controlling 7 segment displays using display drivers. and i have independent unit wise 7 segment displays like this. and im working on 4... |
Thursday, 8 June 2017 - 13:07 |
Circuit simulation software i have seen the proteus 8 working pretty good from the videos on the youtube. but i need an alternative to it (open source). primary thing i want to use this soft is for... |
Tuesday, 6 June 2017 - 10:39 |
Working on timers im currently working on timers to use them as rtc. im in a confusion between frequency and second. #include <avr/io.h> #include <avr/interrupt.h> volatile uint8_t... |
Sunday, 4 June 2017 - 17:17 |
Solved :Sharing External eeprom Is it possible more than one microcontroller share one external eeprom? I'm not satisfied with what Google said |
Tuesday, 28 March 2017 - 06:29 |
Solved: Logic for 365 days for sunset and sunrise Consider a scenario in which I have indicate time for sunset and sunrise. For 365 days ..some days may have same time But variation is more...I have info about timings But to... |
Thursday, 16 March 2017 - 15:25 |
Can i use libraries of arduino?/Are Avr libraries different from one chip to other chip i dont have development board like arduino. setup is just a breadboard ,some jumper wires connecting to avr(here im using atmega16),and 7805 voltage regulator thats it. and i use... |
Tuesday, 14 March 2017 - 16:10 |
Info about components I want to know the popular chips ,devices & components. I know only few .So that I can include them in avr projects. |
Monday, 13 March 2017 - 12:19 |
Use of java and other languages Do java and other languages have support with microcontroller programming ? If please elaborate |
Saturday, 11 March 2017 - 15:53 |
Intercommunication between two or more megaAvrs I know the way using analog signals using decoders ...but is there any other efficient way? |
Wednesday, 8 March 2017 - 16:41 |
Problem insufficient voltage I connected 1st 7segment display to port d, 2nd to port c ,3rd to portb ,4th to porta Problem is ..1,2&3 are getting enough voltage But 4 is not getting enough voltage |
Tuesday, 7 March 2017 - 15:55 |
What's the Use of XTAL in atmega16 I want to know the use of xtal 1 and xtal 2... |
Tuesday, 7 March 2017 - 15:25 |