Post Created date
AVR128DA32 Odd Problems (?)
Altazi wrote:"Unable to boot device. Debugger command Prog Mode Enter failed. Probably worth looking at a backend log from Studio (or pymcuprog -v debug) to get more info on where...
Tuesday, 15 June 2021 - 05:39
AVR128DA32 Odd Problems (?)
Altazi wrote:It seems to have stopped working altogether, Can you read the device ID in the "device programming" window?
Monday, 14 June 2021 - 21:24
Howto upload to Arduino Nano Every via pymcuprog?
awneil wrote:So, I guess, the big question is: does the  on-board SAMD11 provide a CMSIS-DAP interface?   Correctly quoted... but the "serial updi" portion of...
Thursday, 10 June 2021 - 09:59
Cannot program Xplained Pro 4809 - Command failed due to a CRC failure
OK - then: - does your hex/elf file contain an different SYSCFG0 value? - does your code enable/use the CRCSCAN module?
Monday, 31 May 2021 - 06:33
Cannot program Xplained Pro 4809 - Command failed due to a CRC failure
Are you by any chance setting the CRCSRC bits in fuse SYSCFG0 to anything other than NOCRC?
Monday, 31 May 2021 - 05:53
pymcuprog on github
Preferred way of using pymcuprog is of course to install from pypi:   pip install pymcuprog   If you have your Python scripts folder in your PATH, then the pymcuprog CLI...
Tuesday, 11 May 2021 - 07:55
UPDI single-row connector pinout
GND in the middle is also good if you do have a Curiosity Nano you feel like sawing in half...
Sunday, 9 May 2021 - 07:40
MacOS Big Sur & avrdude with mEDBG, nEDBG or ATMEL-ICE
tombull wrote:Is there anything else I can try with pymcuprog? Any way of getting more detailed debugging info? You can enable more logging with -v debug, but you will have...
Friday, 30 April 2021 - 22:08
MacOS Big Sur & avrdude with mEDBG, nEDBG or ATMEL-ICE
Would be interesting to know if you can do hid::open via hidapi in Python (like we do with pymcuprog, for example...)
Friday, 30 April 2021 - 17:43
DGI / Data Visualiser not working with XPlained-Pro
What about without the "autodetect protocols" setting?  (are you using ADP anyway?)
Thursday, 29 April 2021 - 12:31
Pickit 4 with atmega1281 is not programming
Check that you have latest FW (check latest version on the pack server) If you don't have latest, then to upgrade you will unfortunately need to use MPLAB.  :/
Friday, 16 April 2021 - 16:46
What's the "Unable to apply key (69)" Error, and is there an error code reference somewhere?
FYI: error codes can be looked up here: Although this will not help you :/ You mention that ETN36 has been done - did you remove the...
Monday, 29 March 2021 - 19:01