Type in the full discussion title or a part of it.
Discussion Title Created date
assembler/ assembler2 - line numbers
Is there a way to turn on line numbers when using the assembler in the AS4 IDE?
Thursday, 31 May 2012 - 23:50
ATtiny85 fuse/clk woes
Well I was tooling along using my Dragon (ISP mode) with AS4 to work with a ATtiny85 located on a Olimex 8 pin prototype board. The project was set to use the internal clock and...
Thursday, 24 May 2012 - 00:20
ATmega32 based PCBA
Hello, I am interested in this particular ATMega32 based circuit board. http://microcontrollershop.com/product_info.php?cPath=110_159_341&products_id=4327 Does anyone have any...
Thursday, 17 May 2012 - 16:14
Mega32 using serial I/O and getchar()
Hello, If I use UART receive interrupt is there an advantage or need to use as in: some_var= getchar() vs. using some_var = UDR :?:
Friday, 11 May 2012 - 19:50
AS 4.13, terminal emulation
Some time back (several years ago) I recall there was a terminal emulation that worked with Studio. I am using ICCAVR 7.22C and debugging using the simulator in AS4. I call my...
Tuesday, 8 May 2012 - 00:44
A general question on using the SWITCH statement in the ICCV
I have a variable assigned as: int myvar = 0x01; //just a random test value This could be as a global or local to the function where the switch statement is coded. Example:...
Friday, 27 April 2012 - 19:06
ATtiny85 reset pin as output
I have a small project that I need to use all pins as outputs. I see that if I use the RSTDISBL fuse bit that will also disable ISP programming.:( I am thinking that I may be...
Sunday, 22 April 2012 - 16:32
ATMega32 remote/firmware reset
If I want to perform a slave CPU reset via remote, say a RS485 received command to call main()(after main() has already run will this present stack problems? If so is there a...
Sunday, 8 April 2012 - 20:11
CodeVision and include questions
Using CodeVision (evaluation) and include file(s). I am attempting to add a c file in a test project and not getting there. What I want to do is cut the code generated using the...
Friday, 23 March 2012 - 19:11
Codevision and AVR mega
am looking at using CodeVision for AVR Mega use. A couple of questions: [a] CRLF, '\n' does not produce a CR/LF using printf or putchar(). Is there a setting to allow this? [b]...
Wednesday, 21 March 2012 - 18:21
ICCAVR problems w/ 90S8515
Yes, I know the 90S8515 is an old device ,but I need to use what I have on hand. The device is still supported by ICCAVR. I am using ICCAVR version 7.22. The problem: Using the...
Sunday, 11 March 2012 - 19:15
ATtiny2313 timer1 interrupts
OK, I reduced all of my code to the essential functions for testing. I am using a ATtiny2313 and to verify timing I am blinking an output (PB.7) to LED. The timing seems erratic...
Tuesday, 27 December 2011 - 22:03