Type in the full discussion title or a part of it.
Discussion Title Created date
Arduino IDE with own target PCB
Hello clever people, long time since I've been here... I would like to use the Arduino IDE, but instead of uploading through the serial port, I would like to use my own PCB, and...
Thursday, 5 September 2013 - 03:34
It's 13 O'clock!
Hi Since the last ice age I have been trying to get my Nixie Clock (Atmega162) to talk to a DS1302 RTC. Since I use Codevision, with a built-in library, I tried that first. It...
Wednesday, 11 April 2012 - 03:22
Comparing an array in eeprom (codevision)
Happy new year clever people. The following code snippet is the relevant bits from my cat-door controller. ATMEGA8 Self-designed PCB CodevisionAVR It reads characters from an...
Monday, 6 February 2012 - 00:10
Controlling Hobby Servos
Hi clever people I am trying to control a hobby servo from an ATMEGA16, on PortD.4 (OC1B). 16Mhz Crystal. I need to set a PWM with a frequency of 50Hz, then adjust the PWM to...
Friday, 16 December 2011 - 02:36
Solenoid Drive
Greetings all I made a little circuit to drive a solenoid which grips cable in a machine. It is a replacement for the manufacturers part, so I can't change the inputs or anything...
Friday, 11 November 2011 - 12:07
Random numbers appearing in EEPROM
Good afternoon clever people... I have a problem storing and reading data from EEPROM with codevision. This code is for a machine which feeds material thru and cuts. I store the...
Tuesday, 1 November 2011 - 15:51
Looking for RFID Module to read key fob at approx 300mm...
...without having to re-mortgage the house! The cheaply available modules (125Khz 20-50 quid) only read about 150mm max. The next step up seems to be 13.56Mhz long range reader...
Monday, 3 October 2011 - 11:23
AVR Library for Ethernet with Codevision?
Hi all Does anyone know of a codevision compatible version of an ethernet library to interface with WizNet chips? The arduino folks have a library, and it looks quite...
Friday, 26 August 2011 - 09:28
Does anyone have any experience with the ATTINY5 ?
Hi I thought this little chip might be ideal for a little mission I have - read the ADC, switch a fan on/off when appropriate. I am doing this with an ATMEGA16 - written in...
Tuesday, 22 March 2011 - 09:31
Looking for Input Capture example C code or tutorial
Hello clever people! The short version: I'm looking for Input Capture example code or tutorial. I want to measure the time between 2 pulses. If you have some simple C code you...
Thursday, 4 November 2010 - 10:49
ATMEGA64 ISP Question
Hi I have just built a new PCB and assembled it, plugged in my AVRISP2, powered on and clicked "Read Signature" .... to be greeted with the dreaded "Entering Programming Mode.......
Thursday, 14 October 2010 - 14:31