Post Created date
TTL voltage on RX line
If you look at section 9.1 on page 13 of the data sheet you linked to, you will find there are no connections to RX or TX signals. It appears to be a strictly stand alone...
Wednesday, 29 June 2016 - 12:26
Help for H/W basics
js wrote: I wonder whatever happened to college or university courses. I learned most of the basic electronic before college from magazines like Popular Electronics, Byte and...
Saturday, 28 May 2016 - 00:44
ATmega8 with ADE7753, display on 4 digit seven segment
Manish,   When I read this: Can you, please give me direct link regarding ADE7753 (Convert read register's values into actual values; register's value into voltage or current...
Thursday, 26 May 2016 - 20:05
Split from: Help! Vibration sensors!
nivash wrote: Hi freaks..!!! I am using Atmega 16, anybody tell which Vibration Sensor module(either piezo eletric or Inductive method) is suitable for atmega 16 and show me which...
Wednesday, 25 May 2016 - 07:39
How to jump to a Specific Address on Flash?
Just a concept to think about: Use a goto command, skip the function pointer stuff completely. Search "c goto"    
Monday, 16 May 2016 - 13:22
Designing my first "real" PCB, what should i take in consideration.
Get yourself a polyfuse and put it inline with your battery.
Tuesday, 3 May 2016 - 12:13
How Measure Telephone line voltage with mcu
It's more complicated than most people would think. Some details can be found here:
Monday, 2 May 2016 - 17:11
Using a LED driver to provide PWM signals
You really need to post what you are going to be hooking up to the outputs. Will it be a TTL chip or some motor driver chips? On that, it all depends. Off the cuff, I would say...
Tuesday, 26 April 2016 - 11:24
why the output of sprintf is like this?
navidrct wrote:I dont know how should i ask that everyone like Is these q is so hard that want more explain? All input and output is right here what else do u want? Well, I don't...
Tuesday, 26 April 2016 - 06:56
why the output of sprintf is like this?
Here is a sprintf reference: but that's not where your problem is. You never set myvalue to anything.   From another thread you...
Tuesday, 26 April 2016 - 05:40
tip for creating a function for AT Commands
awneil wrote: navidrct wrote:Well i try with function to return array but it cant be in c atmel studio Why can't it ? I suspect the OP can't use Atmel Studio because he is not...
Monday, 25 April 2016 - 19:31
Which combination of resistors is better in an opamp cricuit?
Go to this PAGE and download the Texas Instrument's Analog Engineer's Pocket Handbook for free.
Monday, 25 April 2016 - 15:33