| Discussion Title | Created date |
|---|---|
|
Atmega 48 Include file "m48def.inc" versus "m Hello, can someone please explain to me what is the difference between "m48def.inc" and "m48pdef.inc" Atmeg48 include files. I am using an Atmega48 28 pins DIP. What include file... |
Monday, 11 December 2006 - 18:14 |
|
Atmeg48 include file "m48def.inc" versus "m48 Hello, can someone please explain to me what is the difference between "m48def.inc" and "m48pdef.inc" Atmeg48 include files. Thanks |
Monday, 11 December 2006 - 18:05 |
|
AVR Studio 4 - SP4, Help Problem Hello to all of you! I just reinstalled the AVR Studio 4 and the SP4 upgrade. After the installation I wasn't able to have access to the Help option. If I click on the AVR Tolls... |
Saturday, 2 December 2006 - 15:24 |
|
AVR Studio / Atmel AVR Assembler USART Interface Hi All! I need your help for the following doubts: I am developing a small program to work with a GSM Modem. The project it is mainly to sent AT commands to the modem. The problem... |
Tuesday, 15 August 2006 - 17:29 |
|
EEPROM reading problems (always reading $FF) Hi All! I NEED YOUR HELP AGAIN! I am sorry to for asking for help so many times, but, I am new in assembler programing. The only assembler I used was a line by line assembler long... |
Saturday, 3 June 2006 - 11:05 |
|
ATtimy 2313 PORTD Configuration Hi All! I have very low knowleadge in assembler programing as well as AVR's MCU's. I want to program the PORTD with the following configuration: Bit 0 RXD Bit 1 TXD Bit 2 Int 0... |
Thursday, 1 June 2006 - 10:41 |
|
EEPROM versus FLASH Hi all, I need your help in the following subjects: I am not to much experienced in EEPROM and Flash stuff. What is the difference between keep data like parameters in the in... |
Thursday, 11 May 2006 - 10:52 |
|
Help on AVRASM2 Hi all! I need your help for better understand the AVRASM2. The Assembler do not recognise instructions like the ones bellow. It give errors like undefined symbol or invalid... |
Wednesday, 19 April 2006 - 22:05 |
|
ATtiny2313 - SCK, MISO, MOSI versus JTAGIEC mKII Hi all! I have been using the JTAGIEC mKII for debuging in the ATtiny2313. I design a electronic circuit to a GSM modem and due to the configuration and software simplification I... |
Friday, 7 April 2006 - 18:44 |
|
Interrupt servive routine problems Hi All! I wrote the programe below and wrote another with timer 0 also using interrups. What appens is, if during the global interrupt disable the to save register, SREG and... |
Friday, 31 March 2006 - 11:58 |
|
Communication problems between AVRRisp Mkii and AVR Studio 4 Hi AVR fellows! Anyone can help me in the following problem? I want to program the fuses to enable the external oscilator with Xtal and connect the AVRRisp MkII but, I can not get... |
Saturday, 18 March 2006 - 12:38 |
|
USART Problems Hello everyone! I need your help to solve a USAR problem. I wrote a routine to work with the usart using the PC Hyperterminal, it didn't work, so, I wrote a small routine that you... |
Wednesday, 15 March 2006 - 23:11 |