Post Created date
sound/light controller
Yeah, I'm afraid I am better at programming than electronics, but not much. I really only need this to be simple so rather than try and split the sound into frequencies I have...
Sunday, 10 January 2010 - 02:34
sound/light controller
Thanks for the advice, all probably pretty basic electronics I guess but still over my head. I'll start playing with a few circuits and see what I come up with.
Monday, 4 January 2010 - 22:45
Interfacing the ADS8344 an 16Bit ADC via SPI interface
dangerousdan21 wrote: I use: print(itoa(read_ADC(0,1), temp, 10),0); to send it out the uart. where: uint16_t temp[16]; I really don't know what I am talking about, so...
Saturday, 13 October 2007 - 03:37
Tiny13 and PWM
Koshchi wrote: Well, really you don't need any interrupts at all. Once you have the timer set up for PWM, all you need to do is set OCR0A to the value you want. Your main loop can...
Saturday, 13 October 2007 - 03:32
Tiny13 and PWM
Thanks BrianS and Lars, that got it working. :D
Thursday, 11 October 2007 - 11:32
Tiny13 and PWM
mrono wrote: if(PORTB...
Thursday, 11 October 2007 - 08:05
Tiny13 and PWM
I realised that initialising the PWM continually in the main loop is obviously not the thing to do, so I am just getting the ADC reading and initialising the PWM once before the...
Thursday, 11 October 2007 - 06:28
[TUT] [SOFT] Using the USART - Interrupt driven serial comms
what AVR are you using, maybe it has more than one USART and needs to be USART0 or USART1?
Thursday, 13 September 2007 - 01:31
Interfacing the ADS8344 an 16Bit ADC via SPI interface
The schematic for the ADS8344EVM is on this ADS8344EVM.pdf I am just using push on cables to connect the port pins on the STK500 to the ADS8344EVM.
Monday, 3 September 2007 - 22:14
Interfacing the ADS8344 an 16Bit ADC via SPI interface
MegaUSBFreak wrote:Quote:I have tried this and it is still giving me a 14 bit reading. I still have to disconnect and reconnect CS to fix it. Don´t you have a free port to connect...
Sunday, 2 September 2007 - 21:52
Interfacing the ADS8344 an 16Bit ADC via SPI interface
MegaUSBFreak wrote: If I understand you right, then you have two supplies. * Power from the STK500. Is it 5V or 3.3V to supply the ADC´s VCC? * and the 3V battery to just supply...
Saturday, 1 September 2007 - 22:48
Interfacing the ADS8344 an 16Bit ADC via SPI interface
I really hate to ask more stupid questions, I just can't figure this out though. I have an ADS8344EVM evaluation board and I have it connected to an Atmega16 mounted in an STK500...
Saturday, 1 September 2007 - 08:06

Pages