Post Created date
Once again: Debugging with GDB
You are completely right.. It was after a long day I ordered it, I probably did mistake it for a JTAG ICE MKII clone :(   I made a bash script for changing fuses, but have...
Sunday, 10 September 2017 - 13:27
Once again: Debugging with GDB
Glad to see you are making progress here, Johan! I gave up earlier and ordered an Olimex MK2, for a hopefully easier debugging setup in linux. But will continue trying some more...
Sunday, 10 September 2017 - 11:25
PIN Change Interrupt on ATmega328p
chayanforyou wrote: Yes i read it. I want to detect interrupt occurring for which pin(PB0, PB1 and PB2) change.   So the non functioning pin change interrupt was not the...
Saturday, 9 September 2017 - 13:17
PIN Change Interrupt on ATmega328p
Did you bother to read the section about pin change interrupts in the datasheet?    PCIFR = 0x1; // pin change interrupt flag PCMSK0 = 0x7; // enable pcint2,1,0  
Saturday, 9 September 2017 - 11:45
Configure usbasp or other USB device to lpt1?
Have you had a look at https://www-user.tu-chemnitz.de/~heha/basteln/PC/USB2LPT/ ?   Contrary to all other USB→Parallel adapters which can connect to printers only...
Wednesday, 23 August 2017 - 08:00
Configure usbasp or other USB device to lpt1?
awneil wrote: I doubt that either of those will work for the same reasons as stated in #8     *****   Posts flying in without me reading, I will take my rum...
Tuesday, 22 August 2017 - 14:13
Configure usbasp or other USB device to lpt1?
Google found me this: http://www.ehow.com/how_8698428_redirect-lpt1-usb-printer.html   If that does not work, you can try this:   This is not to be seen as an...
Tuesday, 22 August 2017 - 14:05
ATMEL ICE Debugger USB Drivers Virtual Box
Hey!   I just want to say thank you, you got me on the right path to finally getting things up and running, after migrating everything to linux.   I was missing one step...
Thursday, 12 May 2016 - 13:57

Pages