Type in the full discussion title or a part of it.
Discussion Title Created date
QFN to DIP adapter that looks like DIP package
While DIP is more and more replaced by SMD packages, perhaps a  smart hobbyist or someone with a 3D printer or a factory could create special QFN to DIP adapters that look...
Sun. Apr 12, 2015 - 12:48 PM
More AVRs needed
The AVR is a nice microcontroller and there are already a lot, but there are still to little to choose from? Often you need one for a project which is not available. For example....
Sat. Apr 4, 2015 - 09:22 AM
Why no AVR in uSOIC chip package?
Why does Atmel not produce AVR in uSOIC chip packages?
Mon. Oct 27, 2014 - 08:23 PM
DDS focused AVR
When you program a software DDS higher than 8-bit and lower than 16-bit, overhead starts to increase by a few times (because you need to shift upper bits from the phase...
Fri. Nov 22, 2013 - 01:12 PM
Estimating inductance coil when charging supercap
I want to charge a supercap (400F/2.7V) with a step-down (buck) topology and PWM (AVR), but how to estimate the inductance value of the coil when f_PWM is e.g. 1 kHz? (ESR at 1...
Thu. Jul 19, 2012 - 09:19 PM
Atmel should design an AVR (tiny/mega) line with the possibility to change every feature to any i/o pin (no more hassle with pcb traces.) And build-in even more features (standard... Sun. Feb 26, 2012 - 07:36 AM
Overclocking AVR features/instructions list
Is there any list available for each AVR feature and instructions when overclocking? By watching this video the AVR (ATmega8) pins can be overclocked to 51MHz. http://www.youtube....
Mon. Oct 10, 2011 - 01:45 PM
How do I charge a LiFePo4 cell/battery via solar energy?
Is it possible to charge LiFePo4 cells or batteries via solar power? Because solar energy is not always stable and LiFePo4 needs a stable current as I understand. Is there still a...
Sun. Sep 18, 2011 - 06:58 PM
What programming language are you using?
What programming language are you using to write programs for your AVR microcontroller?
Sun. Dec 12, 2010 - 12:13 AM
Why this assembly error? (AVRstudio)
Why does AVRstudio not recognize the bitname DAOE (Bit 1 "“ DAOE: Digital to Analog Output Enable bit) while no error on the DAEN bitname (Bit 0 "“ DAEN: Digital to Analog Enable...
Sat. Sep 25, 2010 - 11:36 AM
How getting rid of staircase from DAC?
How can I reconstruct (smoothen) an analog signal from a DAC (AT90PWM3)? Because when I use an RC or a low pass filter (2nd order) it changes the shape of the signal. How do I...
Thu. Aug 19, 2010 - 08:34 PM
Parametric Table fault
In the Atmel Parametric Product Table the ATtiny87 shows 16 (Flash/Kbytes) instead of 8. http://www.atmel.com/dyn/product...
Wed. Aug 11, 2010 - 09:37 AM

Pages