Post Created date
Metal resistant compass
Dear all Thanks for your answers, actually the compass will be used for navigation, it should be reasonably cheap, because my customer needs to mass product it, and It will be...
Wednesday, 3 July 2013 - 11:19
circular interpolation
Quote:That would be hard because, if you don't understand the difference between the polar and rectangular co-ordinance systems, it will take more space here and time than I have...
Thursday, 20 June 2013 - 10:21
circular interpolation
Quote:I'm thinking that you will need to use trig and run a series of computations, each at the fraction of a degree, according to the resolution you require. After each...
Thursday, 20 June 2013 - 06:49
circular interpolation
I'm not lazy,I just have the imagination that Linux means lot's of reading... So some Linux expert freaks might come handy?
Wednesday, 19 June 2013 - 14:22
circular interpolation
Quote:Ali, look at the links I provided. You'll find some real code. Thanks for the links, Would you direct me to the right piece of code in LinuxCNC, I think it's very huge code...
Wednesday, 19 June 2013 - 14:15
circular interpolation
Quote:Google "Bresenham circle". Thanks, Do you think that algorithm do not pix elate my machined Part? what is it's accuracy?
Wednesday, 19 June 2013 - 14:07
circular interpolation
I have build my own costume hardware, and software, I do not want to use Mach3 ,etc... I want to do it myself!
Wednesday, 19 June 2013 - 13:59
circular interpolation
I wanted to implement the G02 and G03 parts of the G-code, Basically I have the start and the stop and center points of an arc, and I need to send pulses to the X Y Z steppers,...
Wednesday, 19 June 2013 - 13:41
another DALI Problem
Does All ballast without address assignment would accept the off command 0xFF00?
Saturday, 8 June 2013 - 05:53
50 Ohm calculations
Thanks for your advise, I really need 10 layers and 10 layers is the minimum for my design, I can not lower the layers, Because I'm using a Big FPGA, Has anyone used the saturnpcb...
Monday, 3 June 2013 - 04:54
50 Ohm calculations
Am'I the only one working with more than 4 layers in here?
Sunday, 2 June 2013 - 10:28
50 Ohm calculations
Quote:mikericetga your layer stack up is not symmetrical, It would cause the PCB to bent, Do you have any values for layer spaces and trace widths so That I can compare it with...
Sunday, 2 June 2013 - 05:04

Pages