Post Created date
Interpolating automaticaly
Thanks, The analysis would be on PC, but the function would be calculated on avr for interpolation, if the values are not linear what should I do to reach the best efficient math...
Wednesday, 18 December 2013 - 07:13
4-20ma Transmitter
Thanks for the info,
Thursday, 12 December 2013 - 11:41
4-20ma Transmitter
OK,what is your suggestion Microchip part number? and low cost means under 1USD for 100 units.
Thursday, 12 December 2013 - 09:21
Do you know these connectors
Thanks for the info, Do you have any particular part number?
Thursday, 21 November 2013 - 07:59
7" and capacitive touch!
The touch controller IC is not that important, the touch glass that built with the controller is important,
Tuesday, 20 August 2013 - 04:59
7" and capacitive touch!
thanks for the info,But as clawson told we can buy a whole tablet for a lot less money, I just wanted to have the captive touch upgrade with in the 20-30USD price range at most in...
Monday, 19 August 2013 - 13:29
7" and capacitive touch!
Quote: Projective Capacitive Touch Screens (PanJit Touch Screens) are the screen with a controller (goes on top of the display). About 80USD (quantity 100) for the 7-in touch...
Monday, 19 August 2013 - 05:21
Precise GPS
Thanks for your answers, I have found this page, But I do not understand what they have done, Do you have any Idea?
Thursday, 11 July 2013 - 06:57
Precise GPS
If you wanted to map some city terrain for construction,then there is no missile! and 5.2M matters, you are in your neighbor house bedroom then!
Wednesday, 10 July 2013 - 14:11
Metal resistant compass
Dear Jim Thanks for the options, so which gyro compass do you suggest? Can I use the Silicon gyro chips? like analog devices or ST chips?
Thursday, 4 July 2013 - 08:06
Metal resistant compass
Quote:Change Planck's constant and as if by magic the compass will work inside an iron enclosure. what?
Wednesday, 3 July 2013 - 13:22
Metal resistant compass
Quote:Apart from magic, you need to make a compromise. I did not get your point :)
Wednesday, 3 July 2013 - 12:08