Post Created date
Xmeaga fusebit list
Thanks for the reply. Got it now.
Monday, 21 June 2010 - 11:13
Aplication note 335: voice recorder
Well the quality is by far not good enough for what I need it for so I will have to go another way. Thanks anyway for all the help! Regards
Friday, 16 April 2010 - 16:43
Aplication note 335: voice recorder
Yes, I have built up the circuit according to the appnote 335. It generally works but I have a very loud background noise. Even if I am not playing there is a high tone. And the...
Friday, 16 April 2010 - 12:10
Aplication note 335: voice recorder
Hi, thanks for the replies! I am a good bit further. Like sugested I generated one tone. But that tone also sounded scrambeld. Then I hooked up a transistor directly to the PWM...
Friday, 16 April 2010 - 08:41
Aplication note 335: voice recorder
Ok, thanks a lot. Then I guess I do have some error then. :-( Could you send me a dump of the the data that you recorded with it for a second or so? Regards
Thursday, 15 April 2010 - 19:47
Measure current
@neldim: in retrospect you missed the point. The voltage for the switching regulator would obviously be higher that 5V, like 12V or so. Otherwise it would be impossible to...
Saturday, 20 March 2010 - 12:10
Measure current
Thanks for the replies! I though of building an active "sensor" that regulates a voltage source infront of a resistor to always supply 5V. I could then read the current from the...
Saturday, 20 March 2010 - 09:35
sdcard with bascom
There is a free upgrade to Bascom that is called AVR-DOS. That is what you are looking for. It supports SD card and harddisks with FAT32. http://members.aon.at/voegel/
Saturday, 9 January 2010 - 18:26
touch screen...
Hi dzairo, I somehow never figuerd out hot to use a NTC. Wich type did you use and how do you connect and calculate it? Regards
Monday, 9 November 2009 - 08:59
bascom getadc(0) returns 1023 always
Is that the value that wou receive over a serial port? Can you see in AVR studio if the value is different inside the AVR?
Saturday, 7 November 2009 - 20:47
touch screen...
Why a touch controler??? I used that same display and the Touch with just an AVR. Works great.
Saturday, 7 November 2009 - 20:35
Analog touch screen
Thanks for the raplie. It seems it was just a problem with the ADC. I started the conversion to soon after setting the MUX. :oops:
Thursday, 24 September 2009 - 20:04

Pages