Type in the full discussion title or a part of it.
Discussion Title Created date
delay.h?
When using '_delay_loop_x()' in 'delay.h' it seems that the actual delay is not correct. When looking at the code there is no init of the '__count' to any register. Maybe this...
Monday, 26 January 2004 - 13:36
M128 bad silicon!
If your M128 is manufactured prior dec-2003 it may contain the following bug. By reading flash memory with 'lpm/elpm' att maximum clockrates the read value may be invalid. This...
Thursday, 15 January 2004 - 10:19
lwIP on Ethernut
My Nut/OS TCP/IP stack chrashes too often. So, I plan take a look at lwIP instead (http://www.sics.se/~adam/lwip/). Have anybody tried it already on Ethernut HW? Yes, I know there...
Thursday, 8 January 2004 - 10:11
PSTR()'s in memory > 64K
Hi, As with switch/case's the printf_P() family doesn't seem to work with PSTR()-strings located in memory above 64K. A lot of 'lpm' instead of 'elpm' in the generated code. Maby...
Friday, 22 August 2003 - 15:18
switch/case in boot code
The compiler (3.3) seems to put an 'lpm' instruction for the table jump in switch/case. This doesn't work very well in boot code (>64K). Tell me I'm wrong and just forgot to flip...
Friday, 22 August 2003 - 11:39
ICE 200 halts
I can't make my ICE200 work with an 8535. It halts during downloading of "event memory". AVR studio freezes. (Version is 4.05) Crystal 3.8 Mhz. 5V. PLCC socket+adapter+personality...
Friday, 15 November 2002 - 09:45
External interrupt problem
Hello I use Tiny15 and I'm trying to use an external interrupt to turn on and off an LED. PB2 is the external interrupt pin and I have tried many ways to set up the interrupt but...
Wednesday, 1 May 2002 - 10:32
Microchip coming closer
Hi. This is not an Microchip advertisement but a whining about that Atmel hasn't been able to improve the AVR series in a rapid rate. Especially the ever demanding speed topic....
Friday, 7 September 2001 - 12:07
Imagecraft vs CodeVision
Hi. Have anyone tested both Imagecraft and CodeVisions compliers? I just got a question of wich is best and I have no idea. I think both is very good but imagecraft have been out...
Thursday, 3 May 2001 - 08:40