Type in the full discussion title or a part of it.
Discussion Title Created date
ATMega328p not programmable via ISP with Atmel ICE
I have here an Arduino Nano (from China) and I would like to program the on-board ATmega328p with ISP via the Atmel ICE and Atmel Studio. So I connected the ISP-Header with the 6-...
Saturday, 28 April 2018 - 10:37
Atmel ICE - Adapter from 1.27mm to 2.54mm
Hello,   I would like to buy the Atmel ICE debugger but I am worried about the 1.27mm pin connector because I only use 2.54mm pin cables, are there any adapters out there...
Wednesday, 23 August 2017 - 16:35
Is this TPI connected correctly? Does USBasp work with it?
My board design for an ATtiny10 with TPI connection, to be programmed with an USBasp and avrdude, if it is wrong, please tell me what i have to correct, it is quite hard to find...
Sunday, 30 July 2017 - 21:27
Atmel Studio says Terminal Window is installed, but it isn't
Hi,   if i go to "Extension & Updates" -> "Available Downloads" there is a green check on "Terminal for Atmel Studio" which means, that this tool is already installed...
Saturday, 4 March 2017 - 10:59
ATtiny 10 - TPI programming only @5V?
Hi avr freaks :)   i am currenty designing a small breakout board for the ATtiny 10. The datasheet says that programming via the TPI is only possible @5V supply voltage but...
Tuesday, 28 February 2017 - 19:23
Does my timer work correctly?
Hi,   i am wondering if my timer does work correctly? This is my code:   void initTimer(){ TCCR1 |= (1<<CTC1); //CTC TCCR1 |= (0b0010<<CS10); //CK/2...
Sunday, 16 October 2016 - 18:49
AtTiny85 Timer1 OVF doesn't work
Hi, this is my code:   #define F_CPU 8000000UL #include <avr/io.h> #include <avr/interrupt.h> int main(void) { DDRB |= (1<<PINB1); //PINB1 as output...
Monday, 3 October 2016 - 13:06
Attiny85 - Software I2C?
Hi,   i am wondering if it is possible (or practical) to do software I2C on an attiny85 (in C)? I want to control one of those small 0.96" OLED I2C displays. I am just...
Monday, 3 October 2016 - 10:56
Lithium Ion and Lithium Polymer protection circuits
Hello, i am searching for LiIon and LiPo battery protection circuits (overcharge & overdischarge) similiar to which are used the smartphone batteries. I know about those USB...
Wednesday, 25 May 2016 - 15:13
Universal battery charger - Imax B6?
Hello,   i found a lot of rechargeable batteries today (NiCd, NiMH). I didn't even know that i have 5 1.2V 5Ah batteries! I checked them and they all have around ~0.7V. So i...
Friday, 20 May 2016 - 14:45
How to use OLED Displays without controller?
Hello,   i would like to know if there is any chance to control one of these displays from here: http://www.buydisplay.com/defaul...   even though they don't have a...
Wednesday, 18 May 2016 - 14:47
ATtiny10 programmable by AVR ISP MKII?
Hello forum,   i am just wondering whether the ATtiny10 is programmable by the AVR ISP MKII? Because usually a MISO/MOSI pin is needed to program the AVR MCUs but this...
Wednesday, 4 May 2016 - 19:37

Pages