Post Created date
Jtagice3 sale? (Oct 3 2012)
A little OT: OK - so I'm a simpleton (fully paid up) CVAVR user using STK500 (from CV menus) or USBASP/AVRDUDE (from cmd line) for programming and have a precious Studio 4.18...
Thursday, 4 October 2012 - 08:05
Codevision USART help request with lots of details
cakemonster wrote:Loopback working in codevision...and for the benefit of future readers of his thread who may have the same problem, and as a small contribution from yourself,...
Friday, 28 September 2012 - 08:19
simulation behaves unexpected-motor control
So what happens when clock_second is zero and you do clock_second-- ? Do you think it changes to 59? Suggest you trace, with a pencil and paper, what your code does for different...
Friday, 17 August 2012 - 08:21
AVR unstable w/ buzzer
So what happens if you: - temporarily just make the buzzer output pin high, rather than PWM'ing it - temporarily use another LED instead of the buzzer. The results should pretty...
Friday, 10 August 2012 - 11:36
AVR unstable w/ buzzer
Vashikovich wrote:The schematic is really simple, overall...So just 3 components in absolute total - one AVR, one LED and one buzzer? I guess not, so how about a schematic? And...
Friday, 10 August 2012 - 08:54
check the code.
jayjay1974 wrote:larryvc wrote:Just leave off the "www.". A good browser :wink: should work without it. AFAIK that actually depends on the webserver, not the browser ;)Actually...
Wednesday, 1 August 2012 - 19:56
Motor switching control
justinjohney wrote: ... second++; if(second==59) { second=0; minute++; ... if(minute==59) { hour++; minute=0; ... } } } here is final code. it...
Tuesday, 31 July 2012 - 12:35
Motor switching control
Why jump through hoops doing things that you don't quite understand and potentially lead to more problems? Vcc = (1.1 * 255) / ADCL; if(Vcc if (Vcc...
Tuesday, 31 July 2012 - 10:53
Best book/online resource to learn avr asm?
http://www.avrbeginners.net/ ...second item on menu on left for ASM, the rest is good as well
Friday, 20 July 2012 - 06:54
How can this possibly work after a reset?
Get the eval version of codevision, write some simple C, or load one of its example programs,, compile it and look the .lst file - you will see the preamble, the vector table, how...
Monday, 25 June 2012 - 08:31
delay and the clock cycles
foxbrain wrote:i didn't use LCDSorry - I had it in my mind it was a LCD
Friday, 22 June 2012 - 11:13
delay and the clock cycles
YOU DON'T NEED ANY DELAYS IN YOUR CODE Do you understand why this is? People here will start to get bored if you keep asking about it...and wander off into diversions about the...
Thursday, 21 June 2012 - 16:44

Pages