Post Created date
Need to Learn Touch Screen Programming....Can You Suggest?
Yes, the http://www.lcd-module.com/filead... TFT colour laptop screen image quality and functionality pretty much limited only by your imagination. However the touch screen is...
Thursday, 3 February 2011 - 22:35
Need to Learn Touch Screen Programming....Can You Suggest?
http://www.lcd-module.com/start.... (press the ENGLISH button on the top row of buttons) More graphic displays with touchscreens and relatively simple serial (RS232, SPI, I2C)...
Tuesday, 1 February 2011 - 22:37
Timers on Atmega1284 (and the like)
The CodeVision CodeWizardAVR doesn't allow you to set up Timer3. So is it OK for the simpletons among us to assume that there really is a 16-bit Timer3 on a 1284P?
Tuesday, 1 February 2011 - 11:38
Where to get MAC address for WIZNET module?
have you Googled? Start here by the look of it http://standards.ieee.org/develo... Or for a one off, find an old/broken network card.
Tuesday, 18 January 2011 - 15:37
General Program Flow and Timing (cool project)
I got the impression (unstated) from post #1 that it was a diesel engine (given the rpm limit)
Monday, 17 January 2011 - 20:52
General Program Flow and Timing (cool project)
Obviously you've studied MegaSquirt in great detail? They've obviously cracked all of this - the high level program design strategies, rpm and crank position detection etc etc...
Monday, 17 January 2011 - 11:00
Compression algorithm
Brutte wrote:Quote:For a re-programming application, If you used a code optimized for size, do not expect to find any reasonable compression algorithm as it is already compressed...
Saturday, 15 January 2011 - 15:24
Battery backup not holding time in RTC chip
(the question should have been "can I use the internal pullup resistor on the input pin rather than the external pullup?" - to which the answer is more debatable (but I wouldn't...
Friday, 14 January 2011 - 12:00
Battery backup not holding time in RTC chip
^^^^ ..the best idea so far :)
Friday, 14 January 2011 - 07:12
Using Different Crystal then specified.
You need to look at the specs for the crystal you are considering as you are talking about two different parameters - frequency and accuracy (of frequency). You can get all 4...
Friday, 14 January 2011 - 07:10
How to detect frequency of square waveform?
...or just type your assignment straight here?
Thursday, 13 January 2011 - 10:10
Attiny25 RSTDISBL fuse programming how? ASM
david.prentice wrote:If a STK500 costs you $80 and a tiny25 costs you $1, it is cheaper to throw away 70 tiny25s....but a net $10 for a STK500 after you've emptied your bin of...
Thursday, 13 January 2011 - 10:09

Pages