Post Created date
Good RTC IC
DS1337 is similar as well (but different)
Wednesday, 9 November 2011 - 08:48
motorcycle traction control project - concept - need help
dragilla wrote:I'm a total beginner, so a large society and tons of ready to use code is a big plus for me.Then I would suggest that you do not start your first (ever?) project...
Tuesday, 8 November 2011 - 17:30
antilock braking system
http://www.edaboard.com/search.p... ...looks like we were not the original microcontroller of choice
Tuesday, 1 November 2011 - 17:13
Tiny Programming Port On Small Board
How small? This small? http://www.tag-connect.com/ I have one (the no-legs version) - with a proper commercial fab'bed PCB it's really good. No connection (haha) etc...
Monday, 31 October 2011 - 19:46
16bit sensor on 8-bit MCU
Tron[ic wrote:"]Hi, Is it possible to use a 16bit ADC temperature sensor on a digital input 8bit MCU?What "16bit ADC temperature sensor" are you considering. "16 bit ADC" is a...
Monday, 31 October 2011 - 10:46
reading adc
I think OP wants to walk through the data array and print the index of the first element where the data value is equal to (or greater than) the ADC reading. So if the ADC reading...
Wednesday, 26 October 2011 - 23:39
does mega168P have trouble with pin change interrupt on C1?
Somebody's just gonna have to wire a pot between Vcc and GND, wiper to a PCINT pin, some externally observable indication that the interrupt is firing and twiddle the pot up and...
Monday, 10 October 2011 - 20:59
OBD2
...so tell us what you did in the 2.5 years between your posts - it might help others!
Monday, 10 October 2011 - 11:51
does mega168P have trouble with pin change interrupt on C1?
I've seen it (ATMega168) and it explains nothing (that I can see, but I haven't the brain the size of MBedder's, so I genuinely look forward to being educated) that indicates that...
Sunday, 9 October 2011 - 14:01
does mega168P have trouble with pin change interrupt on C1?
...but it's a pin change interrupt, not an edge detect interrupt?
Sunday, 9 October 2011 - 09:02
PCINT interrupt on level change with slow rising signal
How much current down your resistor divider compared with 100uA/0.6uA (with regards to a low power app)? Anyway, if your stuck with 3V/ms then you have plenty of suggestions on...
Monday, 3 October 2011 - 16:53
PCINT interrupt on level change with slow rising signal
Ugh. MCP6002... Slew Rate: 0.6V/us
Monday, 3 October 2011 - 15:57

Pages