Post Created date
Help with buck switching supply
Alright, so....I've modified the design by including some relays and now my maximum power consumption is close to 800mA. I can't seem to find any of those nifty RECOM regulators...
Wednesday, 12 June 2013 - 22:54
Help with buck switching supply
Kartman wrote:Recom (and others) have the solution to your needs: http://www.recom-international.c... As for incoming 'noise', a common mode choke and some capacitance should take...
Tuesday, 4 June 2013 - 20:53
Jumping to the USB bootloader from software
abcminiuser wrote:Quote: Do you mean a forced reset would but a power on wouldn't? If not then surely when you just plug the thing into USB and it powers up you don't want it to...
Wednesday, 11 July 2012 - 15:49
Jumping to the USB bootloader from software
jgmdesign wrote:clawson wrote:Can't you just advise the users to "plug it in with button X held"? Where button X is some button that holds HWB? I was thinking the same thing until...
Tuesday, 10 July 2012 - 16:48
Jumping to the USB bootloader from software
Thanks for your help Clawson. Some updated info: I talked to the guys and they are willing to break out the HWB pin so it can be externally shorted to make things easier. Now...
Tuesday, 10 July 2012 - 16:22
Jumping to the USB bootloader from software
clawson wrote:Can't you just advise the users to "plug it in with button X held"? Where button X is some button that holds HWB? I'll have to see if that is a viable option. The...
Tuesday, 10 July 2012 - 15:55
Jumping to the USB bootloader from software
Right now I have a device that has a physical HWB and RESET button to enter bootloader. It works quite well, but the bootloader is only needed by us (the supplier). This new...
Tuesday, 10 July 2012 - 15:43
problems in dumping program to atmega16
It it a custom board or an atmel dev board? Are you using the ISP interface?
Friday, 6 July 2012 - 21:00
Atmel original boot loader for mega32u2
josefk wrote:I sent Atmel a support ticket and got the binary back. That's what I always do before searching. Then while I search for one, they usually beat me to it. FYI, the...
Friday, 6 July 2012 - 20:57
Stupid servo motor. :X
applesocks wrote:bobgardner wrote:Your program thinks the avr is running at 8MHz. Forgive me for asking, but since wrong clock freq is a very common problem, I must ask if you...
Friday, 6 July 2012 - 20:49
Converting studio4 project to studio6 project problem
Here is the project in case anyone wants to open it. (150kb) http://ieeebcit.org/triden_usb_f... Chris
Tuesday, 12 June 2012 - 20:36
Converting studio4 project to studio6 project problem
This line is giving and error too: extern bit usb_connected; hid_task.c //! //! @file hid_task.c,v //! //! Copyright (c) 2004 Atmel. //! //! Please read file license.txt for...
Tuesday, 12 June 2012 - 20:26

Pages