Type in the full discussion title or a part of it.
Discussion Title Created date
STK500 Oscillator Problem
Hi, I've been having problems with the external oscillator and software clock on my STK500. :evil: The chip (MEGA32) programmed ok and runs the software, but the timings were...
Thursday, 13 December 2007 - 20:17
Trouble with width warning
Hi, I'm struggling to work out why I get warning: left shift count >= width of type from this code: volatile char GPS_Data[38]; //GPS data is 38 bytes long volatile uint32_t...
Tuesday, 11 December 2007 - 16:20
AVR32/NGW100 noob - can it do what I want?
Hi, I've got a reasonable amount of AVR 8bit experience and have purchased an NGW100 in order to get a bit more grunt for a project at work. My question is, can I program it to...
Monday, 19 November 2007 - 10:16
Mega48 Watchdog not generating an interrupt
I can't get the watchdog to generate an interrupt in order to break out of a loop. I have read the datasheet and I can't work out what I've done wrong. The code just sits in the...
Thursday, 29 June 2006 - 09:09
GCC Noob - Tiny26 Watchdog Interrupt
I'm a bit confused by the listing for ISR(vect) from AVR-LIBC. I know that the Tiny26 can support watchdog interrupts, but the documentation doesn't state support for ISR(WDT_vect...
Tuesday, 27 June 2006 - 11:31
Tiny45 Reset options
Hi, I need to use all 6 I/O pins on my Tiny45, so I can only use BOD to reset my device. Is this wise? I assume that any other internal reset requires connection at the reset pin...
Tuesday, 28 March 2006 - 10:49
8535 on STK-500 getting hot!!!
Hi, Just switched my STK-500 on to find that the 8535QFP is getting mighty warm :shock: It still programs ok, but my other STK-500 doesn't suffer from this so I assume that if...
Thursday, 16 February 2006 - 13:58
Tiny45 High Voltage ISP - JTAGICE mk2 problems
Hi, I'm not sure if it's just me but I seem to have real problems using my JTAGICE mk2 as an ISP. I can probably program my Tiny45, on a target board, a couple of times before it...
Wednesday, 11 January 2006 - 09:05
Tiny45 - Timer0 counts but Timer1 doesn't!!!!
Hi, I'm trying to get 2 independant PWM outputs from my Tiny45. I've got the PWM associated with Timer0 working fine, but I can't seem to get Timer1 to count :oops: .include...
Friday, 6 January 2006 - 08:54
For Info - Tiny25/45/85 Datasheet Error
Hi, I've just got this back from Atmel, might help out other newbies, or those that just skimmed this part of the datasheet (like me! :roll: ) > Problem : Tiny45 Data Sheet Typo...
Thursday, 15 December 2005 - 09:02
Noob problem - Tiny45 PWM, do I need to interrupt?
Hi, I'm hoping someone can help clear the fog in my brain :cry: I'm trying to get a PWM output from the Tiny45, but I want it to free run, i.e. not need an interrupt, but I also...
Wednesday, 7 December 2005 - 13:18