Post Created date
Optiboot 1284p compiled for UART1 instead UART0
Hi Lawson,   I started working with it only today. I have downloaded the mobile app provided by them. The README document says we have to change the key in the ".init3"...
Thursday, 3 March 2016 - 06:33
Optiboot 1284p compiled for UART1 instead UART0
Can somebody guide me to edit code of Optiboot or Peter Fleury STK500v2 boot loader to wait infintely until it can receive command through a mobile phone via UART1. I have removed...
Monday, 29 February 2016 - 14:35
Optiboot 1284p compiled for UART1 instead UART0
Hi Lawson,    I was just confused about the reset vector. Actually I have set the reset vector fuse and set the size of boot loader. And it functions okay. I verified it...
Monday, 29 February 2016 - 12:44
Optiboot 1284p compiled for UART1 instead UART0
How do I write the boot reset fuse. When I am trying to check BOOTRST in the AS7, it is saying the default address is 0x0000. How do I override it to my boot loader address ?
Monday, 29 February 2016 - 12:14
Optiboot 1284p compiled for UART1 instead UART0
Hi all,   Since my new thread was removed, I am asking the next doubt in this same thread,    I want to know, which part of the peter fleury boot loader I should...
Monday, 29 February 2016 - 10:20
Which part of Peter Fleury boot loader to change if I want to move the stack pointer to boot load section on watch dog reset
Hi westfield,   My aim is to jump to boot load section even if a watchdog reset occurs. What are the modifications that I need to make this peter fleury bootloader and the...
Monday, 29 February 2016 - 07:01
Peter Fleury's bootloader
 I did burn a boot loader under 9600 baudrate using Atmel Studio 7 and I had no issues burning it. Am I missing something ?
Saturday, 27 February 2016 - 11:57
Bluetooth communication with Android and iPhone
If you are using Android to control, then use a simple HC 05 bluetooth module with you AVR and use ready made serial monitors like BT Serial monitor and BlueTerm available in play...
Saturday, 27 February 2016 - 07:24
Optiboot 1284p compiled for UART1 instead UART0
Hi Lawson,   Where is the command line option in the arduino IDE ? 
Friday, 26 February 2016 - 12:12
Optiboot 1284p compiled for UART1 instead UART0
Hi Lawson,    As you previously mentioned, I have gone through the STK protocols. These protocols are used in the bootloaders with both answer format and input format. I...
Friday, 26 February 2016 - 11:31
Optiboot 1284p compiled for UART1 instead UART0
Hi Lawson and Kartman,   There were few errors in my code and it dint compile. Now I have made the changes and the code is free of errors. My doubt is, whether my code is...
Friday, 26 February 2016 - 09:25
Optiboot 1284p compiled for UART1 instead UART0
Yes Kartman,   It gives me errors as you said. Yes I confused with bytes and words.   Quote:  error: expected primary-expression before '*' token    ...
Thursday, 25 February 2016 - 13:34

Pages