Type in the full discussion title or a part of it.
Discussion Title Created date
Which part of Peter Fleury boot loader to change if I want to move the stack pointer to boot load section on watch dog reset
Hi all,   I want to know, which part of the peter fleury boot loader I should vary in order achieve to move my stack pointer to move towards the bootloader section of...
Mon. Feb 29, 2016 - 06:05 AM
Does Peter Fleury boot loader STK500v2 support watchdog reset ?
Hi,   I am trying to boot load my atmega2560 to flash hex files even for a watchdog interrupts. I have made slight modification in the source code as followed.   #ifdef...
Sat. Feb 27, 2016 - 12:30 PM
AVRISP mkii - Jungo Driver - Code 10 Issue in Windows 10
Hi ,   I am trying to burn my boot loader into the Arduino mega2560 using the AVRISP mkii. But the device is not recognized. I have tried updating the driver, uninstalling...
Sat. Feb 27, 2016 - 07:43 AM
STK500v2 using UART1
Will changing the UART receive and transfer ports in the stk500boot file available in the " https://github.com/arduino/Ardui... " from 0 to 1 will boot load via UART1 ? If...
Mon. Feb 15, 2016 - 09:41 AM
Relation between BAUD_RATE and crystal frequency
I want to know the relationship between the baud rate and crystal frequency. There are certain documents stating that if you are using a 16MHz crystal your Baud rate must be...
Mon. Feb 15, 2016 - 06:23 AM
Optiboot 1284p compiled for UART1 instead UART0
Hi ,   I have trying to establish a communication between my atmega1284P and bluetooth module HC 05 which could flash hex files into my MCU. I want to flash it via UART1...
Wed. Feb 10, 2016 - 01:19 PM
How do I use a HC - 05 bluetooth module to send a .hex file to my Atmega1284P for boot loading ?
Hi all,   I am working on writing a bootloader so that my MCU communicates through UART via a bluetooth module HC - 05 with the user. How do I send .hex file from the user...
Fri. Feb 5, 2016 - 01:41 PM
Please explain usage of the header file and macros
How do I use routines in http://nongnu.org/avr-libc/ to the gcc-compiler. It would be nice if some one can explain the usage of the header file and macros.   #...
Fri. Feb 5, 2016 - 05:22 AM
How to write to bootloader using UART1 for atmega 1284p
Hello all It will be helpful if you can share simple tutorial on using UART1 to write bootloader for the Atmega 1284p.   Is bootloading similar to flashing the hex file into...
Mon. Feb 1, 2016 - 06:51 AM