ATtiny3216 user manual? Well, it does say "Future Product" on that product page.
One guess is they just bulk-transferred all the AN links, but that the data sheet isn't finished yet?
Or...
Monday, 22 January 2018 - 11:44
How to use fuse for 8MHZ ext oscillator Adding to the confusion re different clock sources is the fact that the Atmel/Microchip data sheet uses the term "Crystal Oscillator" for the case where the only thing you add is...
Monday, 22 January 2018 - 11:38
ATSAMD21 SERCOM Interrupt using ASF larryvc wrote:10k+ Postman is his forum level
I'll accept being called "10k+ Postman" if we agree to that principle for all forum members, Larry. ;-)
Monday, 22 January 2018 - 10:07
Bluetooth device Paulvdh wrote:I can spend a few hours searching for USD 30/hour.
That's cheap..
Sunday, 21 January 2018 - 22:28
Studio4 arrays Mihai_F wrote:in studio 4 every file mentioned in the external dependency section it means that those files are included wright?
Yes, included directly or indirectly. I.e....
Sunday, 21 January 2018 - 21:27
Writing to registers in C without using any library yorem_kastor wrote:I also asked before about the AVR libc license but that topic got unpublished after i made certain changes to it. The question was if it is free to use AVR libc...
Sunday, 21 January 2018 - 19:19
Writing to registers in C without using any library yorem_kastor wrote: if it is possible i will try to write my own I/O library
Apart from the learning experience, what is the goal? Are there any cases where avr-gcc/avrlibc does...
Sunday, 21 January 2018 - 19:15
Writing to registers in C without using any library m.majid wrote:Besides, pointer method seems not optimal İ did a test for experience, CVAVR, ATmega328 Pointer method takes 1 more clock
"Interesting". For avr-gcc the...
Sunday, 21 January 2018 - 19:06
Studio4 arrays Here's a very important question we need to have the answer to if you want any meaningful answers and don't want to frustrate us to the point that we're leaving:
Are you...
Sunday, 21 January 2018 - 15:51
Writing to registers in C without using any library Write a small program, just doing e.g. one simple port I/O. Set the "save-temps" option in Atmel Studio: Project Properties, Toolchain, AVR/GNU C Compiler, Miscellaneous and then...
If this is just a hobby project, then by all means, do it. If this is for actually storing/retrieving and auto-typing passwords then don't. If you ever try to lure someone...
Well, it does say "Future Product" on that product page. One guess is they just bulk-transferred all the AN links, but that the data sheet isn't finished yet? Or...
Adding to the confusion re different clock sources is the fact that the Atmel/Microchip data sheet uses the term "Crystal Oscillator" for the case where the only thing you add is...
larryvc wrote:10k+ Postman is his forum level I'll accept being called "10k+ Postman" if we agree to that principle for all forum members, Larry. ;-)
Paulvdh wrote:I can spend a few hours searching for USD 30/hour. That's cheap..
Mihai_F wrote:in studio 4 every file mentioned in the external dependency section it means that those files are included wright? Yes, included directly or indirectly. I.e....
yorem_kastor wrote:I also asked before about the AVR libc license but that topic got unpublished after i made certain changes to it. The question was if it is free to use AVR libc...
yorem_kastor wrote: if it is possible i will try to write my own I/O library Apart from the learning experience, what is the goal? Are there any cases where avr-gcc/avrlibc does...
m.majid wrote:Besides, pointer method seems not optimal İ did a test for experience, CVAVR, ATmega328 Pointer method takes 1 more clock "Interesting". For avr-gcc the...
Here's a very important question we need to have the answer to if you want any meaningful answers and don't want to frustrate us to the point that we're leaving: Are you...
Write a small program, just doing e.g. one simple port I/O. Set the "save-temps" option in Atmel Studio: Project Properties, Toolchain, AVR/GNU C Compiler, Miscellaneous and then...
Oppss.. Done.
Pages