Post Created date
Attiny2313 locked
No response would suggest they may need an external clock of some description or you are trying to program them too fast   there is s sticky thread on this forum that...
Wednesday, 2 August 2017 - 14:36
Installing Atmel Toolchain on Linux - need advice
Ok what issues have people experienced with the AVR-GCC tool chain installed from the Distro repositories? I am using Fedora with the Fedora packaged tool chain without issue but...
Tuesday, 1 August 2017 - 08:40
Installing Atmel Toolchain on Linux - need advice
Is it not available in the mint repositorys?   it is always best to install software from the distro repositorys if available as it will have been configired & tested to...
Sunday, 30 July 2017 - 16:28
cheap isp programmer for arduino uno
USBASP works fine Arduino as a programmer is also an option   & onw often overlooked option the Raspberry Pi, which not only has the necessary outputs on its GPIO pins it...
Sunday, 30 July 2017 - 13:30
Speeding up flashing through avrdude: advice searched and some oddities.
The -B1 flag sets the programming speed to 1000hz,  I would assume this is because the processor is initially running from the internal * mHz lock with div 8 enables so it is...
Friday, 28 July 2017 - 08:05
Sleeping Until Button Press
what other components do you have in your circuit - how much current do they draw how much current does the battery monitor IC draw (I would home not to much)   perhaps it is...
Friday, 7 July 2017 - 15:54
ATtiny20 PCINT Code Not Functioning Properly
Also your truth table must be in error   you have the status H H twice (for not charging battery ok and Not charging Battery low).
Thursday, 6 July 2017 - 11:35
ATmega 128 select ADC on each timer interrupt
Can you provide an example of you code We don't complete homework assignments but are more than happy to provide guidance & help you resolve your problem.      
Monday, 26 June 2017 - 09:09
source code error
com is probably a #define in the original library code you would need to set this in your own code as well (probably wiser to just #include the library rather than trying to copy...
Wednesday, 21 June 2017 - 10:14
blinking & buzzing stopwatch: how to make piezo buzzer work?
if your micro of choice has PWM outputs then I would et one of these to the desired Freq with a 50% duty cycle & then switch it on to start sound & then of again to stop...
Wednesday, 21 June 2017 - 10:11
Queries
Have you looked at I2c which has similar signals, probably addresses a number of issues that you may have overlooked in your proprietary protocol & most importantly is...
Monday, 19 June 2017 - 09:10
Atmega324P timer interrupt is delayed by mainloop
This may be a silly question but why are you using a timer interrupt to generate PWM instead of using the hardware generated PWM?  This should be totally stable regardless of...
Monday, 12 June 2017 - 09:39

Pages