Post Created date
ATMega8 thermometer - LED display blinks
I recommend to put the display part of the code in timer interrupt with a required refresh rate
Friday, 20 September 2013 - 13:57
Can't program avr; corrupt fuse bits
A parallel porgrammer will do the job. For example stk500 can rescue your AVR. Nandhu
Tuesday, 1 June 2010 - 03:12
USB Interface
To read a pendrive you need a usb host. None of the mentioned micros have not even usb slave capability. Better try micro's with OTG usb Nandhu
Sunday, 30 May 2010 - 11:50
attiny2313 usbtinyisp?
It is already done and here is the link http://www.ladyada.net/make/usbt...
Thursday, 27 May 2010 - 02:23
Please Help with AVRUSB problem
Try using 3.3v zener diodes at data lines of USB Nandhu
Wednesday, 28 April 2010 - 02:46
Hard to find avr chip
Most of the online stores have stock with them. But cost is too much for production of lower quantity. Regarding the delivery of materials from online stores, here in India it...
Tuesday, 27 April 2010 - 06:24
Hard to find avr chip
I havnt seen any of atmega8 including atmega8A in the market. Nandhu
Tuesday, 27 April 2010 - 02:14
Hard to find avr chip
Yesterday, i got quote for 25pcs of atmeg8L. Suddenly it was more than double. I cant get atmega8 anywhere nearby. I dont even get atmega8 16PU too. What is happening? Nandhu
Monday, 26 April 2010 - 16:17
Hard to find avr chip
Quote:I can buy from China or India. Probably cheaper but a long time to wait for delivery. In India it is hard to find the chips, you can get M8 and M16 but not others. Im still...
Friday, 23 April 2010 - 16:35
Please help me with Atmega8.(communication problem)
which software are you using for programming? Have you checked the status of RSTDISBL? It may be set while you are writing the fuse bits. If you have or have access to HV...
Monday, 22 March 2010 - 12:45
AtMega48P BLDC control
Check this out https://www.avrfreaks.net/index.p... Nandhu
Thursday, 10 December 2009 - 13:04
Counting RPM
Option A is best of high rpm and option B for low rpm If the rpm is very low then you need three or four pulses per rotation Nandhu
Friday, 27 November 2009 - 06:22

Pages