Type in the full discussion title or a part of it.
Discussion Title Created date
SAME70N19 USB Not Working
Hello, after having prototyped with Xplained Pro Board SAM E70 I'm moving now to create a custom board with SAME70N19 (100 leads) MCU. Everything seems working BUT USB. I have...
Thursday, 1 September 2022 - 21:06
SAME70 and Atmel Ice
Hello, I am making a custom circuit based upon the SAME70 and I'm trying to program it via Atmel-ICE via SWD protocol. Even if all connections are correctly set, I can't...
Saturday, 16 July 2022 - 21:59
Atmel Studio 7.0.2542 - Not working
Hello, I just moved to the last version of Atmel Studio and it's not working for me. When I load projects done with precedent versions of Atmel Studio and I move to...
Sunday, 9 May 2021 - 21:13
USB MIDI
Hello, I'm using a SAME54 Xplained pro board and I'm trying to develop connectivity via USB to pass MIDI data. The SAM board is the device and the PC the Host. My goal was to...
Wednesday, 6 January 2021 - 01:01
CRITICAL!!! - Atmel Start Loading configuration error
Guys, i just discover that i can no longer load any atmel start configuration with ATSAMD51 MCU inside the Atmel start online gui, it gives loading error. I tried different...
Tuesday, 15 September 2020 - 21:32
SAMD51 External IRQ Driver
Hello, I'm trying to setup simple external IRQ on 3 pins over a SAMD51;. I'm using atmel start. I'm at the very basi: 1) I've setup the External IRQ in start    ...
Monday, 14 September 2020 - 17:26
SAME54 erasing and programming problems
Hello, I am working on a custom board with E54 chip. Unfortunately for the moment i didn't manage to complete any erase action or, even less, programming action.  ...
Monday, 8 June 2020 - 18:44
Xplained Pro SAMD21 - External Crystal
Hello, I'm trying to switch from the internal oscillator to the external Crystal of a Explained Pro SAM D21 using Atmer Start Clock Configurator. The strange thing is that...
Sunday, 16 February 2020 - 19:18
Atmel Start Reconfigure from AS7 broken?
Hi, whatever project i try to reload inside Atmel Start from AS7 with "Re-Configure with Atmel Start project" feature i see an error:     I have tried with several...
Wednesday, 27 December 2017 - 16:22
Atmel Start I2C write and read Async
Hi, I have 2 micro-controllers talking each other via I2C set with Atmel Start. There is a SAMD11 as master writing one byte and requesting the slave for another byte. There is a...
Sunday, 5 November 2017 - 10:39
Atmel Studio 7.0.1645 and SAMD21 Xplained Pro
Hi, I've just updated Visual Studio to last version but when I try to upload SW on a SAMD21 Xplained Pro board I see a screen saying that i have to update the firmware of the...
Saturday, 4 November 2017 - 00:45
I2C on Atmel Start
Hi, I have a SAMD11 configured as I2C Master Sync and a SAMD21 configured as a Slave Sync. Despite several attempts, it looks like the two parties can't communicate.   Is...
Tuesday, 17 October 2017 - 18:10

Pages