Post Created date
Unique chip ID
The lack of two-way communication isn't helping you :) If you did have two-way communication, you could make them request a serial number once, and then switch to one-way.
Wednesday, 7 December 2011 - 13:49
How to program a ATTiny9 with MKII programer?
use the AVR Studio help. AVR ISP Mk2->Hardware Description->Target Interface->TPI
Friday, 2 December 2011 - 11:40
XMega parts availability
Try emailing your distributor for samples and lead times. As an alternative, get the A3 in a qfn or bga package.
Friday, 25 November 2011 - 13:44
Installing AVR5 on a network
Maybe you could map your documents folder to a drive letter. And then change the location of your documents folder to the mapped drive.
Thursday, 17 November 2011 - 09:15
XMEGA64A3 and avr studio 5
Hi, It smells like you forgot to enable the peripheral. Quote:8.4 Power Reduction Registers The Power Reduction (PR) registers provides a method to stop the clock to individual...
Tuesday, 15 November 2011 - 14:02
xmega, rtc and main clock
You have two options: The one mentioned by pixel2011n, using the DFLL to calibrate the internal clock. Or you can use the xmega A4U, which has an alternative pin location for TOSC.
Friday, 11 November 2011 - 13:18
xmega, rtc and main clock
I can use both crystal and rtc crystal on my xmega192A3. But then you didn't mention what xmega you are using.
Friday, 11 November 2011 - 10:40
how to catch line termination with \r\n chars?
This little silly thing should match your line endings. I haven't tried to compile or anything, so no guarantees that it will work out of the box. prog_char LINE_ENDING[] = "\r\...
Sunday, 6 November 2011 - 03:25
Interfacing with Modem from my avr controller through USART
You may be breaking timing constraints. You could try inserting a small delay after receiving the last character of the reply.
Friday, 4 November 2011 - 10:43
inverted I/O
Tron[ic wrote:"]Ok thank you for the explaination. There are no schematics of the STK600. It's a well kept secret. There are partial schematics available of the user peripherals (...
Friday, 4 November 2011 - 10:36
problems running atmega168 at 3v
The atmega168 20PU is guaranteed to work between 2.7V and 5.5V up to 20Mhz The atmega168V 10PU is guaranteed to work between 1.8V and 5.5V up to 10Mhz The P and PA has only one...
Tuesday, 1 November 2011 - 13:05
Stack trace when debugging?
Maybe Atmel should have disabled the stack trace window, so I wouldn't get my hopes up :(
Wednesday, 19 October 2011 - 08:04

Pages